Windows 2003 64 Bit Driver for PERC S100 Integrated/ RMSD_PERC S100 Integrated/ PERC S300 Adapter/ PERC S300 Integrated Modular Controllers, v.2.0.0.0162, A05
Windows 2003 64 Bit Driver for PERC S100 Integrated/ RMSD_PERC S100 Integrated/ PERC S300 Adapter/ PERC S300 Integrated Modular Controllers, v.2.0.0.0162, A05
Microsoft Windows 32位格式中的戴尔更新包(DUP)设计为可以在Microsoft Windows 64位操作系统上运行。Microsoft Windows 64位格式中的戴尔更新包(DUP)仅可在Microsoft Windows 64位操作系统上运行。选择设备驱动程序更新时,请务必选择适合您的操作系统的更新。
为确保下载的完整性,请验证校验和值。
MD5:
9fc7f244f149f9f054f0d5b714a1594c
SHA1:
5b59e3db767fed889c633ba1d84b20963a20273f
SHA-256:
不提供
以管理员身份登录 Windows 以使用自动扫描。如果您已以管理员身份登录并看到此消息,请重新启动。您的系统由 IT 管理员管理,并且功能可能受限。
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Fixed - Default VD cache policy is changed to "No caching"
Enhancements - Background Array Scan - Boot to RD1000 Tape - Consistency Check startup on existing virtual disks after a new virtual disk is created - Support for CougarPoint chipset for S100 - New System support for S300: Coaster, Diamas and Skipper, Slinky - UEFI boot enablement
- Only a single ODD is supported as a boot device. Up to two ODDs can be supported on a system. - When installing an S300, make sure the S100 is disable in the platforms BIOS. The ODD will not function if S100 is active with S300. - W2K3 SP2 or later required for S100 and S300. NOTE! Windows 2003 R2 is not supported. - The BCRAID.SYS and BCCFG.SYS drivers both need to be updated when performing an update using the Zip Pack. Each driver is updated manually. - OM 6.2.0 or higher required to manage S100 and S300 controllers.
Download 1. Click Download Now to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Zip Files
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click OK to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click OK to exit from the installer.
Installation 1. Copy extracted files to media accessable to Windows. 2. Reboot system to Windows OS. 3. Follow Server Manager->Device Manager->Storage Controller, click on the PERC Controller. 5. Click on Update Driver Software and follow the prompts to update the driver. 4. Reboot system for changes to take effect.