AppSync: How to determine if AppSync supports Unisphere for PowerMax ( U4P ) version 10.0.0.2 for Microcode versions below PowerMaxOS 10.0
Summary: Can AppSync use U4P 10.0.0.2 for PowerMax Microcode versions below 10.0
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Yes, AppSync Supports some Microcode levels below 10.0 when using U4P 10.0.0.2
As of the writing of this Article, with the November 17 2002 AppSync Support Matrix being the latest release Support Matrix:
The section titled:
States:
This table describes the minimum supported U4P version by AppSync
For Example:
If the Microcode is 5978.711.711 and AppSync is 4.5
As of the writing of this Article, with the November 17 2002 AppSync Support Matrix being the latest release Support Matrix:
The section titled:
AppSync Supported Unisphere for PowerMax (U4P)
States:
This table describes the minimum supported U4P version by AppSync
For Example:
If the Microcode is 5978.711.711 and AppSync is 4.5
Then U4P 9.2.3.7 is the minimum per the Matrix and any version above is supported, including U4P 10.0.0.2.
Refer to the AppSync Support Matrix with the awareness and understanding the U4P versions listed are minimums.
Additional Information
This Article does not replace the Support Matrix.
Rather it provides a better understanding of the Support Matrix U4P section by:
Rather it provides a better understanding of the Support Matrix U4P section by:
- Highlighting the the statement regarding the minimum version
- Providing an example
Affected Products
AppSyncArticle Properties
Article Number: 000207423
Article Type: How To
Last Modified: 18 Sept 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.