PowerStore: How to connect to the service console over SSH

Shrnutí: Instructions to connect to the service console (service container) on PowerStoreT and PowerStoreX

Tento článek se vztahuje na Tento článek se nevztahuje na Tento článek není vázán na žádný konkrétní produkt. V tomto článku nejsou uvedeny všechny verze produktu.

Příznaky

PowerStore T and PowerStore X models use different physical ports for the management network access.

  • PowerStore T uses port labelled 6.
  • PowerStore X uses ports 0-1 (or bond) on the module labelled 1.

For ssh access using the service port instead of the management port, see PowerStore: SSH and PowerStore Manager access using the Service LAN Ports.
Note: When connecting to the service port, do not disconnect the management cables.


The ssh port used to log in to the service container is:

  • 22 - After the cluster creation is completed.
  • 26 - Before the Initial Configuration Wizard (ICW) is run.

Příčina

SSH access to the nodes may be required for troubleshooting.

Řešení

SSH is not enabled for PowerStore appliances by default. To enable SSH access to the appliance:

  1. Go to Settings.
  2. Select SSH Management from the Security section.
  3. Select the appliance or appliances on which to enable SSH.
  4. Click ENABLE SSH. To disable SSH access, follow the same procedure, but click DISABLE SSH.


Only the user service can log in over ssh. The error below is observed if the wrong username is entered:
No supported authentication methods available (server sent: publickey,gssapi-keyex,gssapi-with-mic)


Example:
image.png
 


The service user password is the password that you have setup during the Initial Configuration Wizard (ICW). The service password can be reset from the PowerStore Manger user interface, under Settings > Support > Service Account.

Dotčené produkty

PowerStore
Vlastnosti článku
Číslo článku: 000131579
Typ článku: Solution
Poslední úprava: 19 pro 2022
Verze:  6
Najděte odpovědi na své otázky od ostatních uživatelů společnosti Dell
Služby podpory
Zkontrolujte, zda se na vaše zařízení vztahují služby podpory.