Dell Networking OS10 How to disable system command
Shrnutí: This article explains how to disable the use of the "system" command.
Tento článek se vztahuje na
Tento článek se nevztahuje na
Tento článek není vázán na žádný konkrétní produkt.
V tomto článku nejsou uvedeny všechny verze produktu.
Pokyny
In Dell Networking OS10, the LINUX system commands can be accessed by using the system command.
By default it is enabled. It can be disabled using system-cli disable.
Be aware that:
Disabling system-cli does not disable the linuxadmin account.
Use system-user linuxadmin disable to disable it.
The following document includes recommendations for securing switches that run Dell SmartFabric OS10.
Dell SmartFabric OS10 and SmartFabric Services Security Configuration Guide December 2022
By default it is enabled. It can be disabled using system-cli disable.
Command syntax
| Command | Explanation |
|---|---|
| OS10# configure terminal | Enter Configure mode |
| OS10(config)# system-cli disable | Disable system command |
| OS10(config)# no system-cli disable | Enable system command |
Sample Output
When system cli is enabled (Default)
-------------------------------
OS10#
OS10# system bash
admin@OS10:/home/admin$
admin@OS10:/home/admin$ exit
OS10#
Disabling system cli
-----------------------
OS10#
OS10# configure terminal
OS10(config)# system-cli disable
OS10(config)# exit
OS10#
When system cli is disabled
-------------------------------
OS10#
OS10# system bash
% Error: Unrecognized command.
OS10#
Be aware that:
Disabling system-cli does not disable the linuxadmin account.
Use system-user linuxadmin disable to disable it.
OS10# configure terminal OS10(config)# system-user linuxadmin disable
The following document includes recommendations for securing switches that run Dell SmartFabric OS10.
Dell SmartFabric OS10 and SmartFabric Services Security Configuration Guide December 2022
Dotčené produkty
Dell EMC Networking N3200-ON, PowerSwitch S4112F-ON/S4112T-ON, PowerSwitch S4128F-ON/S4128T-ON, PowerSwitch S4148F-ON/S4148T-ON/S4148FE-ON, PowerSwitch S4148U-ON, PowerSwitch S4248FB-ON /S4248FBL-ON, PowerSwitch S5212F-ON, PowerSwitch S5224F-ON
, PowerSwitch S5232F-ON, PowerSwitch S5248F-ON, PowerSwitch S5296F-ON, PowerSwitch Z9100-ON, PowerSwitch Z9264F-ON, PowerSwitch Z9332F-ON, PowerSwitch Z9432F-ON, PowerScale Switch S4112F, PowerScale Switch S4148F, PowerScale Switch S5232F, PowerScale Switch Z9100, PowerScale Switch Z9264, SmartFabric OS10 Software
...
Vlastnosti článku
Číslo článku: 000214216
Typ článku: How To
Poslední úprava: 02 říj 2023
Verze: 2
Najděte odpovědi na své otázky od ostatních uživatelů společnosti Dell
Služby podpory
Zkontrolujte, zda se na vaše zařízení vztahují služby podpory.