Data Domain: How to View Realtime Performance and Statistics Charts in the User Interface

Shrnutí: This article discusses how to use tThe Realtime Charts panel which displays up to seven charts that show real-time subsystem performance statistics, such as CPU usage and disk traffic.

Tento článek se vztahuje na Tento článek se nevztahuje na Tento článek není vázán na žádný konkrétní produkt. V tomto článku nejsou uvedeny všechny verze produktu.
Podívejte se na další zdroje

Pokyny

The Realtime Charts panel displays up to seven charts that show real-time subsystem performance statistics, such as CPU usage and disk traffic.
  • Recent CPU
  • Usage Disk
  • DD Boost Data Throughput
  • DD Boost Active Connections
  • File System Operations
  • Network
  • Replication
DD System Manager enables you to view statistics for the amount of data backup to the DD system, and the amount of deduplication performed on the system in chart form.
  • Space Usage
  • Consumption
  • Daily Written
Steps:
  1. Select Home > Realtime Charts. The Performance Charts area displays the selected charts. Each chart shows usage over the last 5 to 10 minutes. 
  2. To view specific data-point information, hover over a chart point.
  3. When a chart contains multiple types of data, you can use the checkboxes in the upper-right corner of the chart to select what to display. For example, if Read is not selected in the upper right of the disk activity chart, only write data is charted.
Results:
 
Recent CPU Usage and Disk data
Figure 1: Recent CPU Usage and Disk data
 
DD Boost Data Throughput and DD Boost Active Connections:
 
DD Boost Data Throughput and DD Boost Active Connections data
Figure 2: DD Boost Data Throughput and DD Boost Active Connections data 

File System Operations and Network: 
 
File System Operations and Network data
Figure 3: File System Operations and Network data

Network and Replication:
 
Network and Replication data
Figure 4: Network and Replication data

Capacity statistics charts:
DD System Manager enables you to view statistics for the amount of data backup to the DD system, and the amount of deduplication performed on the system in chart form. Go to Data Management > File System > Charts to view the charts. There are three different charts available:
  • Space Usage
  • Consumption
  • Daily Written

Use the Chart and Scope list boxes to select the parameters for the chart to display.

NOTE: For systems without Cloud Tier, File System is the only available scope. For systems with Cloud Tier, the scope can be File System, Active Tier, or Cloud Tier.

Use the Date Range options to select a date range to display on the chart. Choose from one of the preconfigured time periods, or specify specific dates to view. Customize any chart by selecting or clearing the available labels.

Space Usage chart:
This chart displays a cumulative representation of the quantity of data that is backed up to the system, the amount of deduplication performed on that data, and the amount of space consumed on the system.

The space usage chart uses the following labels:
  • Pre-Comp Used - The amount of storage consumed before compression
  • Post-Comp Used - The amount of storage consumed after compression
  • Comp Factor - The compression ratio
Consumption chart:
This chart displays a cumulative representation of the amount of space consumed on the system, and the amount of deduplication performed against the total capacity of the system. Administrators may also view the time lines and durations for system cleaning and data movement operations.

The space usage chart uses the following labels:
  • Capacity - The total capacity of the system
  • Post-Comp Used -The amount of storage consumed after compression.
  • Comp Factor - The compression ratio
  • Cleaning - The time lines and duration of system cleaning operations.
  • Data Movement - The time lines and duration of data movement operations.
Daily Written chart:
This chart displays the amount of data written to the system and the amount of deduplication performed on the system on a daily basis.

The space usage chart uses the following labels:
  • Pre-Comp Written - The amount of data written to the system before compression.
  • Post-Comp Written - The amount of data written to the system after compression.
  • Total Comp Factor - The total compression ratio
Pre-CompWrittenPost-CompWrittenTotalCompFactor
Figure 5: Pre-CompWrittenPost-CompWrittenTotalCompFactor

Dotčené produkty

Data Domain
Vlastnosti článku
Číslo článku: 000219177
Typ článku: How To
Poslední úprava: 15 lis 2023
Verze:  3
Najděte odpovědi na své otázky od ostatních uživatelů společnosti Dell
Služby podpory
Zkontrolujte, zda se na vaše zařízení vztahují služby podpory.