CloudBoost: http-proxy를 구성하는 방법
Zusammenfassung: 이 문서에서는 http-proxy 명령을 사용하여 CloudBoost에서 프록시 서버를 구성하는 방법에 대해 설명합니다.
Dieser Artikel gilt für
Dieser Artikel gilt nicht für
Dieser Artikel ist nicht an ein bestimmtes Produkt gebunden.
In diesem Artikel werden nicht alle Produktversionen aufgeführt.
Weisungen
기본적으로 프록시 서버로 구성된 환경에서 CloudBoost 어플라이언스를 사용하면 프록시를 통해 CloudBoost 외부로 모든 트래픽이 전송됩니다. 특정 타겟은 ' 를 사용하여 프록시를 통과하지 않도록 제외할 수 있습니다.
http-proxy exclude' 명령.
참고: 이 명령을 사용하기 전에 제외할 타겟에 대한 서브넷 마스크의 IP 주소와 접두사 크기를 준비하십시오.
' 사용 예
http-proxy' 명령은 입력되는 설정 및 제외의 종류에 따라 다릅니다.
- 프록시를 설정하고 모든 송신 트래픽이 프록시를 통과하도록 합니다.
http-proxy <host:port> Ex: http-proxy proxy.dell.com:8080 - 재설정
http-proxy기본값으로 다시 설정:http-proxy reset - 프록시를 설정하고 지정된 단일 대상을 제외한 모든 송신 트래픽이 프록시를 통과하도록 합니다.
http-proxy <host:port> exclude <ip>/<prefix>- 이 예에서 프록시는 다음과 같습니다.
proxy.dell.com:8080제외할 대상은10.10.10.10서브넷 마스크255.255.255.0파일로 교체합니다.http-proxy proxy.dell.com:8080 exclude 10.10.10.10/24
- 이 예에서 프록시는 다음과 같습니다.
- 프록시를 설정하고 특정 IP 서브넷의 타겟을 제외한 모든 송신 트래픽이 프록시를 통과하도록 합니다.
http-proxy <host:port> exclude <ip>/<prefix>- 이 예에서 프록시는 다음과 같습니다.
proxy.dell.com:8080제외할 대상은 다음과 같습니다.10.10.10.0서브넷 마스크255.255.255.0파일로 교체합니다.http-proxy proxy.dell.com:8080 exclude 10.10.10.0/24
- 이 예에서 프록시는 다음과 같습니다.
- 프록시를 설정하고 지정된 타겟과 특정 IP 서브넷의 타겟을 제외한 모든 송신 트래픽이 프록시를 통과하도록 합니다.
http-proxy <host:port> exclude <ip>/<prefix>,<ip>/<prefix>- 이 예에서 프록시는 다음과 같습니다.
proxy.dell.com:8080제외할 대상은 다음과 같습니다.10.10.10.0서브넷 마스크255.255.255.0그리고 단일 대상은10.20.20.20서브넷 마스크255.255.254.0파일로 교체합니다.http-proxy proxy.dell.com:8080 exclude 10.10.10.0/24,10.20.20.20/23
- 이 예에서 프록시는 다음과 같습니다.
여러 제외를 추가하려면 제외된 각 타겟 사이에 쉼표(,)를 추가합니다.
Betroffene Produkte
CloudBoost Virtual ApplianceProdukte
CloudBoost Virtual ApplianceArtikeleigenschaften
Artikelnummer: 000013606
Artikeltyp: How To
Zuletzt geändert: 24 März 2026
Version: 6
Antworten auf Ihre Fragen erhalten Sie von anderen Dell NutzerInnen
Support Services
Prüfen Sie, ob Ihr Gerät durch Support Services abgedeckt ist.