Dell Unity: Required Network and TCP Ports for Unity Replication

Summary: The tables below list the TCP ports required for Unity Replication. These ports enable communication between Unity Replication services and must be accessible across the network for proper replication functionality. ...

Αυτό το άρθρο ισχύει για Αυτό το άρθρο δεν ισχύει για Αυτό το άρθρο δεν συνδέεται με κάποιο συγκεκριμένο προϊόν. Δεν προσδιορίζονται όλες οι εκδόσεις προϊόντων σε αυτό το άρθρο.

Instructions

The following ports are required for Asynchronous (Async) Replication on Unity:

                             Table 1. Unity Asynchronous (Async) Replication

Interface Protocol Port
mgmt_vdev@mgmt (Unisphere Management IP) TCP 443
Replication TCP 5085
Replication* TCP 5086
Replication TCP 8888

*Required for Unity OE 5.5.0 and later versions.


The following ports are required for Synchronous (Sync) Replication on Unity:

                                Table 2. Unity Synchronous (Sync) Replication

Interface Protocol Port
mgmt_vdev@mgmt (Unisphere Management IP) TCP 443
srm@mgmt (Sync Replication Management IP) TCP 5085
srm@mgmt (Sync Replication Management IP)* TCP 5086

*Required for Unity OE 5.5.0 and later versions.

Videos

Additional information:

Επηρεαζόμενα προϊόντα

Dell EMC Unity, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Hybrid
Ιδιότητες άρθρου
Article Number: 000009368
Article Type: How To
Τελευταία τροποποίηση: 28 Ιουλ 2026
Version:  5
Βρείτε απαντήσεις στις ερωτήσεις σας από άλλους χρήστες της Dell
Υπηρεσίες υποστήριξης
Ελέγξτε αν η συσκευή σας καλύπτεται από τις Υπηρεσίες υποστήριξης.