Data Domain: Accessing the Data Domain System With CIFS (Domain)
Summary: Accessing the Data Domain System With CIFS (Domain) Prompted for authentication (username and password) when attempting to access a share. Cannot connect or browse shares.
Αυτό το άρθρο ισχύει για
Αυτό το άρθρο δεν ισχύει για
Αυτό το άρθρο δεν συνδέεται με κάποιο συγκεκριμένο προϊόν.
Δεν προσδιορίζονται όλες οι εκδόσεις προϊόντων σε αυτό το άρθρο.
Instructions
Accessing the Data Domain System With CIFS (Domain)
SYMPTOMS
- Prompted for authentication (username and password) when attempting to access a share.
- Cannot connect or browse shares
APPLIES TO
- All Data Domain systems
- All DD OS Releases
SOLUTION
The following steps are ordered in the most appropriate sequence to identify the proper resolution for issues accessing the CIFS shares of the Data Domain system in Domain mode. Do not skip a step.
- Verify that the Data Domain system has joined the domain successfully 181313. If the Data Domain system can talk to the domain controller, it cannot authenticate the username and password.
- Verify that the File System is enabled 181308. If the file system on the Data Domain system is disabled, the backup share is not accessible.
- Verify that Network Connectivity is working properly 180564.
- Confirm that all client information is in the Access list. 181315 The Access list allows only the systems specified on it to access the export.
- Confirm if there is a duplicate IP issue in the network. 181860
Note: If your problem still exists after performing the steps in this article:
- Set log level to 3 180555, try again
- Then open case with support
Additional Information
Επηρεαζόμενα προϊόντα
Data DomainΠροϊόντα
Data DomainΙδιότητες άρθρου
Article Number: 000014943
Article Type: How To
Τελευταία τροποποίηση: 02 Σεπ 2025
Version: 4
Βρείτε απαντήσεις στις ερωτήσεις σας από άλλους χρήστες της Dell
Υπηρεσίες υποστήριξης
Ελέγξτε αν η συσκευή σας καλύπτεται από τις Υπηρεσίες υποστήριξης.