Cisco: Kernel panic caused by RCU stall while accessing flash file system
Summary: An MDS Supervisor-4 module resets without warning.
Αυτό το άρθρο ισχύει για
Αυτό το άρθρο δεν ισχύει για
Αυτό το άρθρο δεν συνδέεται με κάποιο συγκεκριμένο προϊόν.
Δεν προσδιορίζονται όλες οι εκδόσεις προϊόντων σε αυτό το άρθρο.
Symptoms
An MDS Supervisor-4 module resets while accessing a flash file system.
The show system reset-reason shows the reason as a kernel panic:
Reason: Kernel Panic
The show system internal kenel nvram-messages previous command has the following messages: 1.A warning for "d_shrink_del" 2. "rcu_sched self-detected stall" type of signature line and "t=" value is 2100 or greater (the CPU number and PID are not relevant)
[850772.912879 <3>] WARNING: CPU: 3 PID: 11665 at ... d_shrink_del+0x30/0x73()
...
[850793.913314 <3>] INFO: rcu_sched self-detected stall on CPU { 3} (t=2101 jiffies g=12138660 c=12138659 q=39875)
...
[850793.917818 <3>] Kernel panic - not syncing: RCU self stall taking too long
Cause
Cisco bug CSCwj03301
This issue may apply only to Cisco MDS NX-OS releases earlier than release 9.4(1).
This issue may apply only to Cisco MDS Supervisor-4 platforms.
Resolution
Fix:
Upgrade to NX-OS code 9.4.1 or higher
Επηρεαζόμενα προϊόντα
Connectrix MDS-Series, Connectrix MDS-9706, Connectrix MDS-9706-V2, Connectrix MDS-9710, Connectrix MDS-9710-V2, Connectrix MDS-9718, Connectrix MDS-9718-V3, Connectrix MDS-Series Firmware 8.X, Connectrix MDS-Series Firmware 9.XΙδιότητες άρθρου
Article Number: 000222207
Article Type: Solution
Τελευταία τροποποίηση: 23 Φεβ 2026
Version: 2
Βρείτε απαντήσεις στις ερωτήσεις σας από άλλους χρήστες της Dell
Υπηρεσίες υποστήριξης
Ελέγξτε αν η συσκευή σας καλύπτεται από τις Υπηρεσίες υποστήριξης.