vProxy-sikkerhedskopiering mislykkes med fejlen: ddp_connect_with_config() mislykkedes, værtsnavn: DD_name, fejl: 5075-DDBOOST-fejl 1 til opslag/sikkerhedskopiering/ost på DD_Name

ddp_connect_with_config() failed, Hostname: DD_name, Err: 5075-DDBOOST Error 1 for lookup /backup/ost on DD_Name (nfs: Operation not permitted)

Indledende kontrol:

• DDBoost kører på DD
• NFSv3 er aktiveret på Data Domain
• Firewallporte er åbne mellem DD og vProxy: NVP vProxy: Fejlfinding af netværksforbindelser i forbindelse med sikkerhedskopiering og gendannelse
• DDBoost-adgangskoden er korrekt
• DDBoost-klientkonfiguration tillader denne særlige klient:

• 1) Example:  
  
  Below example shows both "*" and a client name.  If "*" is missing then only clients in the list are permitted to connect to the DD.
  
  # ddboost clients show config
  Client               Encryption Strength   Authentication Mode
  ------------------- -------------------   -------------------
  *                    none                  none
  MyClient.mycomp.com  none                  none
  MyOtherClient        none                  none
  -------------------  -------------------   -------------------
  (**) The global security settings take precedence over these client(s) specific settings.
  
  2) Example from ddfs.info:
  07/03 14:59:25.659490 [7ff122a44170] WARNING: Client <MyOtherClient.mycomp.com> did not match access list entries
  07/03 14:59:25.659521 [7ff122a44170] nfsproc3_ost_mnt_3_svc: client access denied for <Client IP> version 7.0
  
  3) In some cases you will see that the error log lists the FQDN or the short name, but the client config is using the other form of the name. The configuration and the client name must match exactly. The DDBoost Plugin on the client will determine the name for the client. This will check the local hosts file on the client for a match for the source side IP for the client. If there is a match, it will use it. (Selecting the FQDN name if one is available, then short name) If there is no match, then the plugin will do a DNS query for the IP and use the response returned.
  
  4) If there is a discrepancy between the clients local host entry verses the DDBoost client config, ask the customer to choose which configuration that they would like to change.
  
  a) add "*" to the DD clients list will allow any client with proper credentials to authenticate to the DD.
  # ddboost clients add *
  
  b) add the corresponding name (from the error log, or client side local hosts file) to the DD:
  # ddboost clients add <hostname>
  
  c) modify the local hosts file or DNS for the IP address being used by the client to make it reflect the client name that was added to DD clients list.
  Example for Linux:
  file: /etc/hosts
  10.11.12.13 MyOtherClient.mycomp.com MyOtherClient
    changed to 
  10.11.12.13 MyOtherClient
  
  
  
  

Hvis alle ovenstående er bekræftet ovenfor, skal du kontrollere DDBoost-adgangskodelængden for det MTree, der bruges til vProxy. Den maksimalt tilladte adgangskode til brug med vProxy er 30 tegn lang.

Hvis adgangskodens længde ikke er for lang, anbefales en forbindelseskontrol mellem vProxy og DD ved hjælp af hjælpeprogrammet 'ddpconnchk'. Yderligere oplysninger om brug af 'ddpconnchk': NetWorker: Sådan bruger du værktøjet DDPCONNCHK til at teste DD ddboost-forbindelsen fra NetWorker-værter