Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Some article numbers may have changed. If this isn't what you're looking for, try searching all articles. Search articles

Article Number: 000102955

How to Install Dell Networking OS10 or OS9 on Dell Open Networking (ON) Switches

Summary: Install OS9 and OS10 on Dell ON switch BY ONIE Methods.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content

Instructions

This article explains the steps required to install Dell Networking OS on Dell Open Networking (ON) switches.
 

Steps required for installing OS on Dell Open Networking (ON) switches

 
NOTE: OS10 downloads are available on the Dell Digital Locker.
NOTE: See the ONIE Quick Start Guide for information about installing using HTTP or TFTP.
 
  1. Log in to the ONIE loader on the switch by choosing the menu on the boot process.
HOW11548_en_US__4ONIE Loader(1)
  1. Choose the ONIE loader from the boot menu.
image.png
 
NOTE: This example below already has an FTOS install.

  1. You may see continual messages similar to those seen below. To stop these messages, run the below command twice to be sure the service stops: 

onie-discovery-stop 

HOW11548_en_US__5ON Switch FTOS install 3

  1. Run the command fdisk -l to view the current storage locations. This helps determine where the USB is. In this case, the USB is at "/dev/sdb1" For the following steps, ensure to reference the proper location. If you do not see the USB device that means the format is not correct or the USB key has some partitions. The mandatory format required is FAT or FAT32 or EXT4 for Linux.
HOW11548_en_US__6ON Switch FTOS install 4
  1. (Optional) If required, format the USB by running the command:
mkfs.vfat /dev/sdb1 
HOW11548_en_US__7ON Switch FTOS install 5
  1. If you have already copied the BIN file into the (extract the TAR with 7-zip), go to next steps. If NOT, unplug the key and plug into a laptop and copy the BIN file.
  2. Create a directory for the USB to mount to:
mkdir /mnt/usb
HOW11548_en_US__8ON Switch FTOS install 7
  1. Mount the USB to the newly created directory: 
mount -t vfat /dev/sdb1 /mnt/usb
HOW11548_en_US__9ON Switch FTOS install 8
  1. Go to the directory where we just mounted the USB drive:
cd /mnt/usb
HOW11548_en_US__10ON Switch FTOS install 9
  1. From here, run the ls command. You should see the operating system file listed.
Format for OS9:
 
image.png

Format of OS10:
 
PKGS_OS10-Enterprise-10.5.4.55- installer-x86_64.bin
  1. Now the operating system can be installed. Ensure that the correct filename is used (filenames are case-sensitive): 
onie-nos-install <name of file.bin>
image.png
 

Article Properties

Affected Product

OS9, PowerSwitch S3048-ON, PowerSwitch S4048-ON, PowerSwitch S4810-ON, PowerSwitch S6000 ON, PowerSwitch Z9100-ON, SmartFabric OS10 Software

Last Published Date

24 Feb 2023

Version

4

Article Type

How To

Back to Top