Avamar:许可证显示 protected-data-max 为 0,而不是实际最大值
Summary: 许可证显示 protected-data-max=“0”,而不是实际的最大受保护数据值(Avamar v7.3 及更高版本)。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
传统许可证 (.xml) 在 Avamar v7.2 及更早版本上显示值”protected-data-max匹配 Avamar Server 上受保护的最大容量的“:
avmaint license --avamaronly
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<licensekey
generation-time="XXXXXXXXXX"
account-id="CXXXXXXXXXX"
asset-name="FQDN"
asset-reference-id="XXXXXXXXXX"
expires="0"
protected-data-max="5120">
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
</licensekey>
在 Avamar v7.3 或更高版本上使用通用许可平台 (.lic) 生成的新许可证显示参数”protected-data-max=0“,应用后。
avmaint license --avamaronly
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<licensekey
generation-time="XXXXXXXXXX"
account-id="CXXXXXXXXXX"
asset-name="FQDN"
asset-reference-id="XXXXXXXXXX"
expires="0"
protected-data-max="0">
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
<macaddr addr="XX:XX:XX:XX:XX:XX"/>
</licensekey>
许可团队已经确认 CLP 许可证不再像传统许可证那样绑定到 MAC 硬件地址。
新的许可方法使客户能够使用通过其帐户购买的容量。换言之,参数 protected-data-max=“0”是预期的,如果使用 CLP 在 v7.3 或更高版本上。
Affected Products
AvamarProducts
AvamarArticle Properties
Article Number: 000155755
Article Type: How To
Last Modified: 12 Oct 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.