Dell NativeEdge: NativeEdgeサービス コンソール クライアントからのインターフェイス出力を解釈する方法
Summary: この記事では、インターフェイスを一覧表示するときにサービス コンソール ツールからの出力を解釈する方法について説明します。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
NativeEdge Service Consoleクライアント ツールを起動し、NativeEdge-enabled DeviceのMACアドレスを入力すると、次のメッセージが表示されます。
続行するには、NativeEdgeエンドポイントと同じレイヤー2ネットワーク上にある関連インターフェイスを選択します。
Multiple interfaces are up. Select the valid interface from the device: (after this follows a list of NICs and their MAC addresses)
続行するには、NativeEdgeエンドポイントと同じレイヤー2ネットワーク上にある関連インターフェイスを選択します。
Additional Information
NativeEdgeサービス コンソールは、クライアントとNativeEdgeエンドポイント間でレイヤー2ベースの接続を使用します。サービス コンソール ツールの起動元のクライアント マシンに複数のネットワークが構成されている場合、NativeEdgeエンドポイントとの接続に使用するクライアント マシン上のネットワーク インターフェイスを選択するオプションがユーザーに表示されます。つまり、L2ネットワーク上にあるクライアント マシン上のインターフェイスをNativeEdgeエンドポイントとして選択します。
Affected Products
NativeEdge Solutions, NativeEdgeArticle Properties
Article Number: 000216330
Article Type: How To
Last Modified: 11 Mar 2024
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.