Dell NativeEdge: Como interpretar o resultado da interface do client do NativeEdge Service Console
Summary: Este artigo descreve como interpretar a saída da ferramenta de console de serviço ao listar interfaces.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Depois de iniciar a ferramenta de client do NativeEdge Service Console e inserir o endereço MAC do NativeEdge-enabled Device, a seguinte mensagem é exibida:
Para continuar, selecione a interface relevante que também está na mesma rede de Camada 2 que o NativeEdge Endpoint.
Multiple interfaces are up. Select the valid interface from the device: (after this follows a list of NICs and their MAC addresses)
Para continuar, selecione a interface relevante que também está na mesma rede de Camada 2 que o NativeEdge Endpoint.
Additional Information
O console de serviços do NativeEdge usa a conectividade baseada na Camada 2 entre o client e o endpoint do NativeEdge. Se a máquina client na qual a ferramenta do console de serviço está sendo iniciada tiver várias redes configuradas, o usuário terá a opção de escolher a interface de rede na máquina client que será usada para se conectar com o NativeEdge Endpoint, ou seja, selecionar a interface na máquina client que está na rede L2 como o NativeEdge Endpoint.
Affected Products
NativeEdge Solutions, NativeEdgeArticle Properties
Article Number: 000216330
Article Type: How To
Last Modified: 11 Mar 2024
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.