Connectrix B-Series：升級至 Fabric OS 9.1.1c 後，使用「fosexec」命令的 Inline 命令傳回錯誤
Summary: 升級至 Fabric OS （FOS） 9.1.1c 後，無法使用「fosexec」命令，從 UNIX 或 Linux 伺服器執行至交換器的內嵌命令。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
環境：
Fabric OS 9.1.1c
問題：
輸出顯示從 UNIX 或 Linux 伺服器執行內嵌命令時的錯誤。在相同主機殼上探索不同的邏輯交換器 FID 時，命令會停止回應。範例：
[hosttest@VM1234 ~]$
[hosttest@VM1234 ~]$ ssh aa.bb.cc.dd fosexec --fid 44 -cmd 'firmwareshow'
hosttest@aa.bb.cc.dd's password:
/bin/stty: 'standard input': Inappropriate ioctl for device
/bin/stty: 'standard input': Inappropriate ioctl for device
/etc/ssh_inline_profile: line 25: FUNCNEST: readonly variable
Appl Primary/Secondary Versions
------------------------------------------
FOS v9.1.1c
v9.1.1c
---------------------------------------------------
"firmwareshow" on FID 44:
[hosttest@VM3198 ~]$Cause
此問題是在內部測試期間發現。升級到 FOS 9.2.0a 時，發現錯誤發生變更。
錯誤：
錯誤：
[hosttest@VM3198 ~]$
[hosttest@VM3198 ~]$ ssh aa.bb.cc.dd fosexec --fid 44 -cmd 'firmwareshow'
hosttest@10.60.23.25's password:
/bin/stty: 'standard input': Inappropriate ioctl for device
/bin/stty: 'standard input': Inappropriate ioctl for device
Appl Primary/Secondary Versions
------------------------------------------
FOS v9.2.0a
v9.2.0a
---------------------------------------------------
"firmwareshow" on FID 44:
[hosttest@VM3198 ~]$Resolution
解決方案：
升級至 Fabric OS 9.2.0b 或更新版本。
因應措施：
直接在交換器上執行命令。
Additional Information
請參閱 Brocade DEFECT FOS-850854 和 DEFECT FOS-844429，討論此問題。
Affected Products
Connectrix, Connectrix B-SeriesProducts
Connectrix B-Series Fabric OS 9.XArticle Properties
Article Number: 000218645
Article Type: Solution
Last Modified: 29 July 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.