Connectrix B-Series: Fabric OS 9.1.1c로 업그레이드한 후 "fosexec" 명령을 사용하는 인라인 명령이 오류를 반환합니다.
Summary: FOS(Fabric OS) 9.1.1c로 업그레이드한 후 UNIX 또는 Linux 서버에서 "fosexec" 명령을 사용하여 스위치로 인라인 명령을 실행할 수 없습니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
환경:
패브릭 OS 9.1.1c
문제:
출력은 UNIX 또는 Linux 서버에서 인라인 명령을 실행할 때 오류를 표시합니다. 동일한 섀시에서 다른 논리 스위치 FID를 검색할 때 명령이 응답을 중지합니다. 예:
[hosttest@VM1234 ~]$
[hosttest@VM1234 ~]$ ssh aa.bb.cc.dd fosexec --fid 44 -cmd 'firmwareshow'
hosttest@aa.bb.cc.dd's password:
/bin/stty: 'standard input': Inappropriate ioctl for device
/bin/stty: 'standard input': Inappropriate ioctl for device
/etc/ssh_inline_profile: line 25: FUNCNEST: readonly variable
Appl Primary/Secondary Versions
------------------------------------------
FOS v9.1.1c
v9.1.1c
---------------------------------------------------
"firmwareshow" on FID 44:
[hosttest@VM3198 ~]$Cause
이 문제는 내부 테스트 중에 발견되었습니다. FOS 9.2.0a로 업그레이드할 때 오류가 변경되었습니다.
오류:
오류:
[hosttest@VM3198 ~]$
[hosttest@VM3198 ~]$ ssh aa.bb.cc.dd fosexec --fid 44 -cmd 'firmwareshow'
hosttest@10.60.23.25's password:
/bin/stty: 'standard input': Inappropriate ioctl for device
/bin/stty: 'standard input': Inappropriate ioctl for device
Appl Primary/Secondary Versions
------------------------------------------
FOS v9.2.0a
v9.2.0a
---------------------------------------------------
"firmwareshow" on FID 44:
[hosttest@VM3198 ~]$Resolution
해결 방법:
패브릭 OS 9.2.0b 이상으로 업그레이드합니다.
해결 방법:
스위치에서 직접 명령을 실행합니다.
Additional Information
이 문제를 논의하는 Brocade DEFECT FOS-850854 및 DEFECT FOS-844429를 참조하십시오.
Affected Products
Connectrix, Connectrix B-SeriesProducts
Connectrix B-Series Fabric OS 9.XArticle Properties
Article Number: 000218645
Article Type: Solution
Last Modified: 29 July 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.