PowerEdge：套用預設設定時，Dell E810-2C 網路介面卡發生錯誤
Summary: 嘗試將預設設定套用至 Dell Intel E810-2C 乙太網路介面卡時發生錯誤。這些配接卡已設定允許全部關閉連接埠。兩個連接埠的連接埠選項都設為 4x25。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
設為預設值時，可能會出現下列錯誤。
Cause
這是與埠枚舉相關的設計限制。變更連接埠選項時，不應進行任何其他變更。設為預設時，所有組態選項會一次變更。
Resolution
若要解決此問題，請手動將這些設定變更為預設值：
- 允許連接埠總關閉：已停用
- 連接埠選項：選項 0：2x1x100G
Affected Products
Intel PRO Family of Adapters, PowerEdge R350, PowerEdge R440, PowerEdge R450, PowerEdge R540, PowerEdge R550, PowerEdge R640, PowerEdge R6415, PowerEdge R650, PowerEdge R650xs, PowerEdge R6515, PowerEdge R6525, PowerEdge R740, PowerEdge R740XD
, PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R840, PowerEdge R940, PowerEdge R940xa, PowerEdge T350, PowerEdge T360, PowerEdge T550, PowerEdge T560, PowerFlex appliance R650, Powerflex appliance R750, PowerFlex appliance R640, PowerFlex appliance R740XD, PowerFlex appliance R7525, PowerFlex appliance R840
...
Article Properties
Article Number: 000221407
Article Type: Solution
Last Modified: 07 May 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.