OME-M: compliance check may fail on MX9116n and MX5108n
Summary: The MX9116n and MX5108n may fail the compliance check in Open Manage Enterprise- Modular (OME-M).
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
The MX9116n and MX5108n may fail the compliance check in Open Manage Enterprise- Modular. This issue occurs when a firmware baseline has been created in Open Manage Enterprise- Modular based on the "Latest Component Versions on Dell.com" catalog. 
The current IOM version is listed as the ONIE version and compared to the current IOM OS10 version in the catalog, as seen below.
Cause
The issue stems from a problem with component mapping.
Resolution
This issue is fixed with the release of Open Manage Enterprise- Modular 2.20.10.
For earlier versions, as a workaround, the firmware baseline can be implemented based on the "Validated Firmware Solution Baseline on Dell.com" catalog.
This is the recommended catalog for MX7000 solution.
Affected Products
Dell EMC Networking MX5108n, Dell EMC Networking MX9116n, Dell OpenManage Enterprise-Modular, PowerEdge MX7000Article Properties
Article Number: 000228733
Article Type: Solution
Last Modified: 16 Apr 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.