PowerFlex How to Configure management session timeout parameters

Summary: Configure the management session idle timeout on each MDM as required by your organization.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Configure management session timeout parameters

Configure the management session idle timeout on each MDM as required by your organization.

When the system authenticates a user, all commands are performed with the user's respective role until a logout is performed, or until the session expires by reaching one of the following timeouts:

  • Maximum session length (default: 8 hours)
  • Session idle time (default: 10 minutes)

You can modify these parameters by editing the MDM conf.txt file:

  • Linux: /opt/emc/scaleio/mdm/cfg/conf.txt
  • Windows: C:\Program Files\emc\scaleio\mdm\cfg\conf.txt
  1. To configure the maximum session length, edit the value of the user_session_hard_timeout_secs parameter. The minimum is 10 seconds, the maximum 10 years, and the default 8 hours.
  2. To configure session idle time, edit the value of the user_session_timeout_secs parameter. The minimum is 10 seconds, maximum 3 months, default 10 minutes.
  3. After changing the parameters, restart the secondary MDMs. After the secondary MDMs are up, reassign the primary MDM to one of the secondary and then restart the MDM service (delete and create service).
  4. To ensure application resilience, make these changes on every MDM.

 

Additional Information

Affected Products

PowerFlex appliance Intelligent Catalog Software

Products

PowerFlex rack, VxFlex Ready Nodes, PowerFlex Appliance, PowerFlex custom node, ScaleIO, PowerFlex appliance R650, PowerFlex appliance R6525, PowerFlex appliance R660, PowerFlex appliance R6625, Powerflex appliance R750, PowerFlex appliance R760 , PowerFlex appliance R7625, PowerFlex custom node, PowerFlex custom node R650, PowerFlex custom node R6525, PowerFlex custom node R660, PowerFlex custom node R6625, PowerFlex custom node R750, PowerFlex custom node R760, PowerFlex custom node R7625, PowerFlex rack connectivity, PowerFlex rack HW, PowerFlex rack RCM Software, PowerFlex Software, VxFlex Ready Node, VxFlex Ready Node R640, VxFlex Ready Node R740xd, PowerFlex appliance R640, PowerFlex appliance R740XD, PowerFlex appliance R7525, PowerFlex appliance R840, VxFlex Ready Node R840 ...
Article Properties
Article Number: 000249620
Article Type: How To
Last Modified: 17 Jan 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.