PowerFlex 無法清除 SDS 裝置錯誤 - 裝置狀態在作業系統層級為離線
Summary: 使用 SDS「清除裝置錯誤」無法運作,且裝置仍處於錯誤或故障狀態。 當 SDS 裝置上有許多同時發生的裝置錯誤時,管理裝置的作業系統可能會使裝置離線。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
案例
SDS 裝置故障或報告錯誤,嘗試使用 SDS「清除裝置錯誤」時,裝置會一直處於錯誤或故障狀態。
症狀
ScaleIO 系統事件回報磁碟裝置錯誤或故障:
799 2016-01-22 17:28:39.818 SDS_DEV_ERROR_REPORT ERROR Device error reported on SDS: 10.3.1.21, Device: /dev/sdb. State: NORMAL upDownState: UP processState: DEV_ERR_INPROGRESS devErrState: REPORT
查詢 SDS 報告磁碟裝置錯誤或故障:
ScaleIO-10-1-1-202:~ # scli --query_sds --sds_id 9780122600000003
Device information (total 8 devices):
1: Name: ScaleIO-6a0a6209 Path: /dev/sdb Original-path: /dev/sdb ID: 851f01c100030000
Storage Pool: SASPOOL, Capacity: 1675 GB Error-fixes: 0 scanned 0 MB, Compare errors: 0 State: Normal
2: Name: ScaleIO-6a0a620a Path: /dev/sdc Original-path: /dev/sdc ID: 851f01c200030001
Storage Pool: SASPOOL, Capacity: 1675 GB Error-fixes: 0 scanned 0 MB, Compare errors: 0 State: Normal
3: Name: ScaleIO-6a0a620b Path: /dev/sdd Original-path: /dev/sdd ID: 851f01c300030002
Storage Pool: SASPOOL, Capacity: 1675 GB Error-fixes: 0 scanned 0 MB, Compare errors: 0 State: Normal
4: Name: ScaleIO-6a0a620c Path: /dev/sde Original-path: /dev/sde ID: 851f01c400030003
Storage Pool: SSDPOOL, Capacity: 1489 GB Error-fixes: 0 scanned 0 MB, Compare errors: 0 State: Normal
5: Name: ScaleIO-6a0a620d Path: /dev/sdf Original-path: /dev/sdf ID: 851f01c500030004
Storage Pool: SASPOOL, Capacity: 1675 GB Error-fixes: 0 scanned 0 MB, Compare errors: 0 State: Error
6: Name: ScaleIO-6a0a620e Path: /dev/sdg Original-path: /dev/sdg ID: 851f01c600030005
Storage Pool: SSDPOOL, Capacity: 1489 GB Error-fixes: 0 scanned 0 MB, Compare errors: 0 State: Normal
7: Name: ScaleIO-6a0a620f Path: /dev/sdh Original-path: /dev/sdh ID: 851f01c700030006
Storage Pool: SASPOOL, Capacity: 1675 GB Error-fixes: 0 scanned 0 MB, Compare errors: 0 State: Normal
8: Name: ScaleIO-6a0a6210 Path: /dev/sdi Original-path: /dev/sdi ID: 851f01c800030007
Storage Pool: SASPOOL, Capacity: 1675 GB Error-fixes: 0 scanned 0 MB, Compare errors: 0 State: Normal
SVM/Linux 訊息檔案報告離線裝置:
Jan 22 17:28:35 ScaleIO-10-1-1-201 kernel: [45678.865605] end_request: I/O error, dev sdg, sector 1138313984 Jan 22 17:28:37 ScaleIO-10-1-1-201 kernel: [45681.452800] sd 2:0:6:0: [sdg] task abort on host 2, ffff8800b83f6e80 Jan 22 17:28:37 ScaleIO-10-1-1-201 kernel: [45681.452877] sd 2:0:1:0: [sdb] task abort on host 2, ffff8801b7476d80 Jan 22 17:28:37 ScaleIO-10-1-1-201 kernel: [45681.453086] sd 2:0:8:0: [sdh] task abort on host 2, ffff8800b83f6280 Jan 22 17:28:37 ScaleIO-10-1-1-201 kernel: [45681.453109] sd 2:0:8:0: [sdh] task abort on host 2, ffff8800a37a6c80 Jan 22 17:28:37 ScaleIO-10-1-1-201 kernel: [45681.453133] sd 2:0:9:0: [sdi] task abort on host 2, ffff8800b83f6b80 Jan 22 17:28:47 ScaleIO-10-1-1-201 kernel: [45691.537180] sd 2:0:5:0: rejecting I/O to offline device
磁碟裝置上的 ESXi VMkernel 記錄報告錯誤:
2016-01-22T09:40:21.801Z cpu1:33420)ScsiDeviceIO: 7024: Could not detect setting of QErr for device naa.614187704f3b47001e34b585468abf85. Error Not supported. 2016-01-22T09:40:21.801Z cpu1:33420)ScsiDeviceIO: 7538: Could not detect setting of sitpua for device naa.614187704f3b47001e34b585468abf85. Error Not supported. 2016-01-22T09:40:21.801Z cpu5:33593)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x28 (0x439e1a830cc0, 0) to dev "naa.614187704f3b47001e34b585468abf85" on path "vmhba1:C2:T1:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x6 0x29 0x0. Act:NONE 2016-01-22T09:40:21.801Z cpu5:33593)ScsiDeviceIO: 2607: Cmd(0x439e1a830cc0) 0x28, CmdSN 0xd62 from world 0 to dev "naa.614187704f3b47001e34b585468abf85" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x6 0x29 0x0. 2016-01-22T09:40:21.801Z cpu5:33593)ScsiCore: 1609: Power-on Reset occurred on naa.614187704f3b47001e34b585468abf85 2016-01-22T09:40:21.844Z cpu5:33593)NMP: nmp_ThrottleLogForDevice:3178: Cmd 0x1a (0x439e1a830cc0, 0) to dev "naa.614187704f3b47001e34b585468abf85" on path "vmhba1:C2:T1:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. Act:NONE 2016-01-22T09:40:21.844Z cpu5:33593)ScsiDeviceIO: 2645: Cmd(0x439e1a830cc0) 0x1a, CmdSN 0xd66 from world 0 to dev "naa.614187704f3b47001e34b585468abf85" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. 2016-01-22T09:40:21.844Z cpu1:33420)ScsiDevice: 3835: Successfully registered device "naa.614187704f3b47001e34b585468abf85" from plugin "NMP" of type 0 2016-01-22T09:40:21.844Z cpu1:33420)NMP: nmp_DeviceUpdateProtectionInfo:569: Set protection info for device 'naa.614187704f3b47001e34b585468abf85', Enabled: 0 ProtType: 0x0 Guard: 0x0 ProtMask: 0x0 2016-01-22T22:27:49.085Z cpu19:33115)WARNING: NMP: nmpDeviceTaskMgmt:2284: Attempt to issue lun reset on device naa.614187704f3b47001e34b585468abf85. This will clear any SCSI-2 reservations on the device.
影響
磁碟裝置維持為故障。
您無法清除 SDS 裝置錯誤。
Cause
當磁碟裝置出現問題,且磁碟裝置因任何原因沒有回應時,作業系統會使磁碟裝置離線。
注意:如果磁碟裝置故障,裝置不會回到線上狀態,而且可能需要更換磁碟裝置。
Resolution
因應措施
SVM - Linux 環境:
- 確認 磁碟裝置目前的狀態:
[root@ssltest ~]# cat /sys/block/sdx/device/state offline
- 如果磁碟裝置標示為「離線」,請使用下列命令 將磁碟裝置「連線」:
echo "running" > /sys/block/sdx/device/state
- 使用 SCLI 或 UI 清除 SDS 裝置 錯誤。
Windows 環境:
- 使用「邏輯磁碟管理員」或磁碟零件驗證磁碟裝置目前的狀態:
C:\>diskpart Microsoft DiskPart version 6.1.7601 Copyright (C) 1999-2008 Microsoft Corporation. On computer: ISENABLOVSL1C DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 238 GB 0 B DISKPART>
- 如果磁碟裝置標示為「離線」,請使用下列命令 將磁碟裝置「連線」, 或使用「邏輯磁碟管理員」:
DISKPART> online disk
任何作業系統上線上磁碟裝置的替代選項:
注意:此選項需要「停機時間」,並在 ScaleIO 系統上觸發重建/重新平衡:
- 如果可能,請將 SDS 輸入維護 模式
- 重新開機 SDS 伺服器
- 結束維護模式 (若在步驟 1 完成)
- 清除 SDS 裝置錯誤 (使用 UI 或 CLI)
- 在 ScaleIO 中確認裝置狀態
Affected Products
PowerFlex rack, ScaleIOArticle Properties
Article Number: 000281632
Article Type: Solution
Last Modified: 06 Mar 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.