NVP vProxy: Slik endrer du innstillingene for nettverksgrensesnittet i vProxy Appliance manuelt
Summary: Denne artikkelen beskriver hvordan du manuelt endrer vertsnavnet og nettverksinnstillingene på et NVP vProxy-apparat.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Prosessen for å endre informasjon om vProxy-nettverk er beskrevet i integreringsveiledningen for NetWorker VMware, som er tilgjengelig på Dells kundestøtte. (Du må være logget på med Dell-kontoen din).
- Åpne en SSH-økt til vProxy-apparatet, og godkjenn med
adminRegnskapsførere
MERK: Hvis vProxy ikke kan nås via SSH, starter du en nettkonsolltilkobling til vProxy fra vSphere-nettklienten.
- Bytt brukere til
root:
sudo su -
- Kjør
config_network.shSkript for å oppdatere grensesnittinnstillingene og erstatte parametrene med verten og nettverksinformasjonen:
/opt/emc/vproxy/bin/config_network.sh <Interface> <FQDN> <IP Address> <Netmask> <Gateway> <DNS List (comma separated)>
Eksempel:
nsr-vproxy01:~ # /opt/emc/vproxy/bin/config_network.sh eth0 nsr-vproxy01.amer.lan 192.168.9.151 255.255.255.0 192.168.9.1 192.168.9.100
Successfully applied new network settings
active
Restarting network services...
eth0 up
link: #2, state up, mtu 1500
type: ethernet, hwaddr 00:50:56:be:35:0c
config: compat:suse:/etc/sysconfig/network/ifcfg-eth0
leases: ipv4 static granted
addr: ipv4 192.168.9.151/24 [static]
route: ipv4 default via 192.168.9.1 proto boot
Restarting vProxy services...
nsr-vproxy01:~ # cat /etc/sysconfig/network/ifcfg-eth0
DEVICE=eth0
BOOTPROTO='static'
STARTMODE='auto'
USERCONTROL='no'
IPADDR=192.168.9.151
NETMASK=255.255.255.0
nsr-vproxy01:~ # cat /etc/resolv.conf
search amer.lan
nameserver 192.168.9.100
nsr-vproxy01:~ #
- Start vProxy-verktøyet på nytt:
reboot
Additional Information
Affected Products
NetWorkerProducts
NetWorker FamilyArticle Properties
Article Number: 000157759
Article Type: How To
Last Modified: 07 Aug 2026
Version: 13
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.