PowerStore: Sistem Kontrolü, gereksiz aşamaları algılar

Summary: Sistem Kontrolü, aşırı sürücü aşınmasına yol açabilecek gereksiz sapmalar olup olmadığını algılar.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Sistem Denetimi aşırı aşınma sorunu tespit ederse aşağıdaki hata mesajı görüntülenir: "Sürücülerde aşırı aşınmaya neden olan olası bir sorun algılandı. (KB#000220203)"

PowerStore Manager ekran görüntüsü:image.png

svc_health_check hizmet komut dosyası tarafından algılandığında:
[...@ABCDEF-A ~]$ svc_health_check run -rhc dp_dedupe_destage_leak_check
Name                               Location  Status     Description
Datapath Dedup Destage Leak        node_a    Failed     Possible issue causing excessive wear on drives is detected. (KB#000220203)
Datapath Dedup Destage Leak        node_b    Failed     Possible issue causing excessive wear on drives is detected. (KB#000220203)
 
 
SUMMARY Status: Failed
   Passed:      0
   Failed:      2
   Total:       2
 

Cause

Resolution

Sorun algılanırsa 3.6 veya sonraki bir sürüme yükseltin.
Yakın gelecekte 3.6 sürümüne yükseltme yapılamazsa, yardım için teknik desteğe başvurun. Hızlı işlem için bu KB Makalesine bakın. Gelecekte meydana gelecek aşırı sürücü yıpranmasını önlemek için bir komut dosyası çalıştırılabilir.

Additional Information

Affected Products

PowerStore
Article Properties
Article Number: 000220203
Article Type: Solution
Last Modified: 14 Jun 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.