PowerFlex: impossibile aggiungere un nodo di standby a un cluster MDM

Summary: Impossibile aggiungere un nodo di standby al cluster MDM.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Quando si tenta di sostituire un nodo MDM slave con un nodo di standby, viene visualizzato il seguente errore nel registro eventi:

22892 2017-10-03 07:50:21.908 CLI_COMMAND_FAILED        WARNING          Command REPLACE_CLUSTER_MDM was not successful. Error code: The MDM could not be found [3982]

Il comando utilizzato è stato:

#scli --replace_cluster_mdm --add_slave_mdm_name Manager2 --remove_slave_mdm_name Manager3 --allow_leave_failed --i_am_sure

Dove la query all sarebbe simile a:

#scli --query_cluster
Cluster:
    Name: SIO: 3_node, State: Normal, Active: 3/3, Replicas: 2/2
Master MDM:
   Name: Manager1 ID: 0x123456789
        IPs: X.X.Y.X, X.X.Y.X, Management IPs: X.X.X.X, Port: 9011
        Version: 2.0.5014
Slave MDMs:
    Name: Manager3, ID: 0x987654321
        IPs: X.X.Y.X, X.X.Y.X, Management IPs: X.X.X.X
        Status: Normal, Version: 2.0.5014
Tie-Breakers:
    Name: TB1, ID: 0x213546789
        IPs: X.X.X.X, X.X.X.X, Port: 9011
        Status: Normal, Version: 2.0.5014
Standby MDMs:
    Name: Manager2, ID: 0x2455547834b33141, Manager
        IPs: X.X.X.X, X.X.X.X, Management IPs: X.X.X.X, Port: 9011
    Name: TB, ID: 0x123457689, Tie Breaker
        IPs: X.XX.X, x.x.x.x, Port: 9011

 

Cause

Non era installato alcun pacchetto MDM sul nodo di standby.

Resolution

Rimuovere il nodo di standby:

#scli --remove_standby_mdm --remove_mdm_name Manager2

Install the MDM package on the standby mode - for svm: 

#MDM_ROLE_IS_MANAGER=1 rpm -i < package >

Add the standby node back to the cluster:

#scli --add_standby_mdm --mdm_role manager --new_mdm_ip x.x.x.x,x.x.x.x --new_mdm_name Manager2 --new_mdm_management_ip x.x.x.x

Then run the '--replace_cluster_mdm ' command again.

Additional Information

Vedere PowerFlex Come sostituire un membro del nodo del cluster MDM | Dell Stati Uniti 

Affected Products

PowerFlex rack, VxFlex Product Family
Article Properties
Article Number: 000033324
Article Type: Solution
Last Modified: 29 Jan 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.