Sådan genererer du SSH-nøglepar med PowerFlex

Summary: Hvis du vil oprette SSH-nøgler til en PowerFlex-node, switch, OS-administrator, OS-bruger, skal du bruge denne procedure til manuelt at generere de SSH-nøgler, der er af RSA-typen, og sikre, at nøglen genereres uden adgangsudtryk. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Trin

  1. Genererenprivatnøgleved hjælp affølgendekommando:
ssh-keygen -b 2048 -t rsa

 

  1. Indtast en filsti for at gemme de offentlige og private nøgler, eller fortsæt med standardfilstien uden et adgangsudtryk: Eksempel på output:

 

Enter file in which to save the key (/root/.ssh/id_rsa):
Enter passphrase: # do not enter a passphrase
Enter same passphrase again: # do not enter a passphrase

 

Eksempeloutput, der angiver, at de offentlige og private nøgler er gemt i standardfilstien:

 

Your identification has been saved in /root/.ssh/id_rsa 
Your public key has been saved in /root/.ssh/id_rsa.pub 
The key fingerprint is:
SHA256:fKIllqp5UXeuEW7xuYeE7PNHpvjAUatNx6I/bisRqRU root@PFMP2-4 
The key's randomart image is:

Eksempel på output

  1. Kontroller , at de offentlige og private nøgler er gemt i standardfilstien: /rod/.ssh/. Eksempel på output:

 

cd /root/.ssh
ls

 

    • id_rsa.pub angiverenoffentlignøgle.
    • id_rsa angivererenprivatnøgle.

Affected Products

ScaleIO
Article Properties
Article Number: 000324363
Article Type: How To
Last Modified: 25 May 2025
Version:  1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.