Dell Networking如何使用USB下载N系列交换机上的固件
Summary: 如何使用 USB 在 Dell Networking N 系列交换机上下载固件。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
简介
本文讨论使用 USB 将固件下载到交换机的步骤。
使用 USB 下载交换机固件的步骤：
提醒：浏览 如何访问 Dell Digital Locker ，了解有关从 Dell Digital Locker 访问和下载的信息。
步骤 1
将固件文件（.stk 文件）复制到 USB 设备。
提醒：验证 USB 设备是否为 FAT32 格式。
步骤 2
输入以下命令以验证是否检测到设备：
show usb device
提醒：如果未检测到 USB，请尝试另一个 USB，因为某些 USB 未被正确检测到。
输出示例
Console# show usb device Device Status.................................. Active Manufacturer................................... xxxxxxxxx Product Name................................... xxxxxxxxxx Device Serial Number........................... xxxxxxxxxxxxxxxxxxx Class Code..................................... 0x0000 Subclass Code.................................. 0x0000 Protocol....................................... 0x0000 Vendor ID...................................... xxxxxx Product ID..................................... xxxxxx USB Version Compliance......................... 2.0
步骤 3
将固件文件从 USB 设备复制到交换机的备份分区。
输出示例
console# copy usb://N4000v6.5.4.3.stk backup Transfer Mode.................................. Binary Data Type...................................... Code Destination Filename........................... backup Management access will be blocked for the duration of the transfer Are you sure you want to start? (y/n) y File transfer in progress. Management access will be blocked for the duration of the transfer. please wait... File contents are valid. Copying file to flash... File transfer operation completed successfully.
步骤4
输入以下命令以验证文件是否已成功复制到备份分区。
show version
输出示例
Console# show version Machine Description............... Dell Networking Switch System Model ID................... N4032F Machine Type...................... Dell Networking N4032F Serial Number..................... XXXXXXXXXXXXXXXXXXXXX Manufacturer...................... 0xbc00 Burned In MAC Address............. XXXX.XXXX.XXXX System Object ID.................. 1.3.6.1.4.1.674.10895.3044 CPU Version....................... XLP308H-B1 SOC Version....................... BCM56842_A1 HW Version........................ 3 CPLD Version...................... 17 unit active backup current-active next-active ---- ----------- ----------- -------------- -------------- 1 6.2.7.2 6.5.4.3 6.2.7.2 6.2.7.2
步骤5
输入以下命令，使备份分区在重新启动后成为活动分区。
boot system backup
输出示例
Console# boot system backup Activating image backup ...
步骤6
再次输入以下命令以验证最新固件是否显示在“next-active”下
show version
输出示例
Console# show version Machine Description............... Dell Networking Switch System Model ID................... N4032F Machine Type...................... Dell Networking N4032F Serial Number..................... XXXXXXXXXXXXXXXXXXX Manufacturer...................... 0xbc00 Burned In MAC Address............. XXXX.XXXX.XXXX System Object ID.................. 1.3.6.1.4.1.674.10895.3044 CPU Version....................... XLP308H-B1 SOC Version....................... BCM56842_A1 HW Version........................ 3 CPLD Version...................... 17 unit active backup current-active next-active ---- ----------- ----------- -------------- -------------- 1 6.2.7.2 6.5.4.3 6.2.7.2 6.5.4.3
步骤7
保存当前配置并重新启动交换机。交换机应提供新的固件代码。
步骤8
根据固件要求升级启动代码和 CPLD。
提醒：在 戴尔支持 网站上查看平台和版本的升级指南和发行说明，以验证是否需要升级启动代码、CPLD 或 Xloader。
Cause
不需要
Resolution
请参阅上文
Affected Products
N Series, PowerSwitch E3200-ON Series, PowerSwitch N1100-ON Series, PowerSwitch N2000 Series, PowerSwitch N2100 Series, PowerSwitch N3000 Series, Dell EMC PowerSwitch N3000E-ON Series, Dell EMC PowerSwitch N3100 Series, Dell EMC Networking N3200-ON
, PowerSwitch N4000 Series, PowerConnect 8024, PowerConnect 8024F, PowerConnect 8100 Series
...
Products
PowerSwitch N1100-ON Series, PowerSwitch N1500 Series, PowerSwitch N2000 Series, PowerSwitch N2100 Series, PowerSwitch N2200-ON Series, PowerSwitch N3000 SeriesArticle Properties
Article Number: 000131978
Article Type: Solution
Last Modified: 28 Mar 2024
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.