Isilon：在認可 OneFS 8.2 升級後，Smartconnect 服務 IP 位址 （SSIP） 在所有已設定的 VLAN 介面上遺失

Summary: 本文說明升級至 8.2 時，任何以 VLAN 設定的介面上遺失 SSIP 的事件。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

在認可升級到 OneFS 8.2 時，Smartconnect 服務 IP 位址 （SSIP） 將不再適用于任何已配置 VLAN 標記的介面的區功能變數名稱稱查詢和負載平衡。
注意：針對任何以 SSIP 和 VLAN 標記設定的子網，此問題並不適用。  此外，這不適用於任何其他升級類型或版本。  此功能僅適用于升級至 8.2 時。
若要說明此問題，內部重制會反映問題如何觸發，以及需要哪些條件 -
>> 我們可以看到 SSIP 存在於所有介面（169.168.1.9、169.168.10.9、169.168.20.9）： 
MN-X410-CLUS-1# ifconfig
bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO>
       ether 00:0a:f7:
       inet 169.168.1.20 netmask 0xffffff00 broadcast 169.168.1.255 zone 1
       inet 169.168.1.9 netmask 0xffffff00 broadcast 169.168.1.255 zone 1
       nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
.
.
vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet6 fe80::20a:f7: %vlan0 prefixlen 64 scopeid 0x8 zone 1
       inet 169.168.10.20 netmask 0xffffff00 broadcast 169.168.10.255 zone 1
       inet 169.168.10.9 netmask 0xffffff00 broadcast 169.168.10.255 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 10 parent interface: bxe0
vlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet6 fe80::20a:f7: %vlan1 prefixlen 64 scopeid 0x9 zone 1
       inet 169.168.20.9 netmask 0xffffff00 broadcast 169.168.20.255 zone 1
       inet 169.168.20.20 netmask 0xffffff00 broadcast 169.168.20.255 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 20 parent interface: bxe0        
>> 開始升級至 8.2.0.0： 
MN-X410-CLUS-1# uname -a
Isilon OneFS MN-X410-CLUS-1 v8.2.0.0 Isilon OneFS v8.2.0.0 B_8_2_0_0_011(RELEASE): 0x80200500000000B:Thu Jun 20 10:29:21 PDT 2019
    root@sea-build11-01:/b/mnt/obj/b/mnt/src/amd64.amd64/sys/IQ.amd64.release   FreeBSD clang version 3.9.1
(tags/RELEASE_391/final 289601) (based on LLVM 3.9.1) amd64


MN-X410-CLUS-1# ifconfig
bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO>
       ether 00:0a:f7:
       inet 169.168.1.20 netmask 0xffffff00 broadcast 169.168.1.255 zone 1
       inet 169.168.1.9 netmask 0xffffff00 broadcast 169.168.1.255 zone 0
       nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
.
.
vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.10.20 netmask 0xffffff00 broadcast 169.168.10.255 zone 1
       inet 169.168.10.9 netmask 0xffffff00 broadcast 169.168.10.255 zone 0
       inet6 fe80::20a:f7: %vlan0 prefixlen 64 scopeid 0x8 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 10 vlanpcp: 0 parent interface: bxe0
       groups: vlan
vlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.20.20 netmask 0xffffff00 broadcast 169.168.20.255 zone 1
       inet 169.168.20.9 netmask 0xffffff00 broadcast 169.168.20.255 zone 0
       inet6 fe80::20a:f7: %vlan1 prefixlen 64 scopeid 0x9 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 20 vlanpcp: 0 parent interface: bxe0
       groups: vlan
>> 已驗證的 vlans 和 SSIP 在重新開機後建立和指派： 
MN-X410-CLUS-1# uname -a
Isilon OneFS MN-X410-CLUS-1 v8.2.0.0 Isilon OneFS v8.2.0.0 B_8_2_0_0_011(RELEASE): 0x80200500000000B:Thu Jun 20 10:29:21 PDT 2019
    root@sea-build11-01:/b/mnt/obj/b/mnt/src/amd64.amd64/sys/IQ.amd64.release   FreeBSD clang version 3.9.1
(tags/RELEASE_391/final 289601) (based on LLVM 3.9.1) amd64


MN-X410-CLUS-1# ifconfig
bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO>
       ether 00:0a:f7:
       inet 169.168.1.20 netmask 0xffffff00 broadcast 169.168.1.255 zone 1
       inet 169.168.1.9 netmask 0xffffff00 broadcast 169.168.1.255 zone 0
       nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
.
.
vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.10.20 netmask 0xffffff00 broadcast 169.168.10.255 zone 1
       inet 169.168.10.9 netmask 0xffffff00 broadcast 169.168.10.255 zone 0
       inet6 fe80::20a:f7: %vlan0 prefixlen 64 scopeid 0x8 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 10 vlanpcp: 0 parent interface: bxe0
       groups: vlan
vlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.20.20 netmask 0xffffff00 broadcast 169.168.20.255 zone 1
       inet 169.168.20.9 netmask 0xffffff00 broadcast 169.168.20.255 zone 0
       inet6 fe80::20a:f7: %vlan1 prefixlen 64 scopeid 0x9 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 20 vlanpcp: 0 parent interface: bxe0
       groups: vlan
>> 升級處於預先認可狀態： 
MN-X410-CLUS-1# isi upgrade view

Upgrade Status:

Current Upgrade Activity: OneFS upgrade
   Cluster Upgrade State: Ready to commit
   Upgrade Process State: Running
      Upgrade Start Time: 2019-07-13T12:38:25
      Current OS Version: 8.0.0.6_build(117)style(5)
      Upgrade OS Version: 8.2.0.0_build(11)style(5)
        Percent Complete: 100%

Nodes Progress:

     Total Cluster Nodes: 1
       Nodes On Older OS: 0
          Nodes Upgraded: 1
Nodes Transitioning/Down: 0

LNN  Progress  Version  Status 
--------------------------------
1    100%      8.2.0.0  upgraded
>> 已承諾升級： 
MN-X410-CLUS-1# isi upgrade commit
You are about to COMMIT an upgrade, it CANNOT be rolled back after this, are you sure? (yes/[no]): yes
SSIP is now missing on all vlan interfaces, however non-vlan interface is NOT affected:
MN-X410-CLUS-1# ifconfig
bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO>
       ether 00:0a:f7:
       inet 169.168.1.20 netmask 0xffffff00 broadcast 169.168.1.255 zone 1
       inet 169.168.1.9 netmask 0xffffff00 broadcast 169.168.1.255 zone 0
       nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
.
.
vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.10.20 netmask 0xffffff00 broadcast 169.168.10.255 zone 1
       inet6 fe80::20a:f7: %vlan0 prefixlen 64 scopeid 0x8 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 10 vlanpcp: 0 parent interface: bxe0
       groups: vlan
vlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.20.20 netmask 0xffffff00 broadcast 169.168.20.255 zone 1
       inet6 fe80::20a:f7: %vlan1 prefixlen 64 scopeid 0x9 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 20 vlanpcp: 0 parent interface: bxe0
       groups: vlan

Cause

升級至 8.2 時，flexnet 的組態檔案 （flx_config.xml） 會分割成更小、更窄的資訊。  新資料夾稱為節點資訊，每個節點的介面和狀態資訊皆可提供。  但是，在升級期間不會擷取 vlan 資訊，因此會從每個節點節點資訊檔案中排除任何 vlan 組態。  完成升級後，Smartconnect 會嘗試讀取節點資訊檔案，但無法擷取任何 vlan 詳細資料來指派 SSIP。
偵錯isi_smartconnect_d時，我們會在記錄中看到下列錯誤： 
2019-07-15-T12:46:12:DEBUG:0x80c612010:NodeInterfaceGetVlanNic_inlock():nodeinfo.c:1281: Error STATUS_NOT_FOUND (0xc0000225)
2019-07-15-T12:46:12:DEBUG:0x80c612010:NodeInterfaceIsStatus():nodeinfo.c:1385: Error STATUS_NOT_FOUND (0xc0000225)
2019-07-15-T12:46:12:DEBUG:0x80c612010:VIPLoadInterface():vip_coord.c:480: Error STATUS_NETWORK_UNREACHABLE (0xc000023c)

Resolution

此問題僅在升級至 8.2.0 時發生。此問題已在 8.2.1.0 及更新版本中修正。任何升級至 8.2.0 以上的更新版本均不受影響。  如果您懷疑您受到此問題影響，請先聯絡支援並參考此知識庫文章，然後再繼續執行下列步驟。
  1. 若要解決此問題，必須強制變更 flx_config.xml 和 nodeinfo 組態。  啟用和停用 Smartconnect 偵錯記錄即可觸發。
若要啟用偵錯記錄： 
# isi_sc_log_level -l debug
若要將記錄變更為資訊： 
# isi_sc_log_level -l info
確認 IP 位址已傳回，且程式正在執行中： 
# isi_for_array ifconfig | grep <SSIP>
# isi_for_array -s ps auwx | egrep "(smartconnect|dnsiq)" | grep -v grep
注意：重新開機精神尚未解決此問題。  精長包括isi_dnsiq_d、isi_smartconnect_d和isi_flexnet_d。

Products

Isilon Gen6, Isilon HD400, Isilon NL410, Isilon X210, Isilon X410
Article Properties
Article Number: 000168627
Article Type: Solution
Last Modified: 14 Dec 2023
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.