PowerProtect Data Manager: VMDK가 크기 변경 오류로 인해 원래 VM으로 복원하지 못함
Summary: PowerProtect Data Manager-VMDK가 크기 변경 오류로 인해 원래 VM으로 복원하지 못했습니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
하나의 VMDK를 원래 VM으로 복원할 때 실패하고 오류 코드가 표시됨 ARV0007을 클릭합니다.
관련 오류 메시지는 다음과 같습니다.
Disk xxxx- "Hard disk x" has a changed size(in bytes) from xxx to xxx
Cause
백업 후 하드 디스크 크기가 증가했습니다.
PowerProtect Data Manager가 백업을 수행할 때 하드 디스크 1 크기는 여전히 40GB였습니다. 백업 후 고객은 크기를 45GB로 늘렸습니다.
하드 디스크 크기가 변경되었기 때문에 PowerProtect Data Manager는 이 VMDK(하드 디스크 1)를 원래 VM으로 복원하는 것을 지원하지 않습니다.
PowerProtect Data Manager가 백업을 수행할 때 하드 디스크 1 크기는 여전히 40GB였습니다. 백업 후 고객은 크기를 45GB로 늘렸습니다.
하드 디스크 크기가 변경되었기 때문에 PowerProtect Data Manager는 이 VMDK(하드 디스크 1)를 원래 VM으로 복원하는 것을 지원하지 않습니다.
Resolution
VMDK를 원래 VM 크기로 다시 변경하면 PowerProtect Data Manager를 통해 VMDK를 원래 VM으로 복원할 수 있습니다. VMware는 VMDK 크기를 늘릴 수만 있고 줄일 수는 없습니다.
해결 방법은 전체 VM을 새 VM으로 복원하거나 VMDK를 다른 VM으로 복원하는 것입니다.
VMDK 크기가 조정된 후 수행된 백업은 정상적으로 성공합니다.
해결 방법은 전체 VM을 새 VM으로 복원하거나 VMDK를 다른 VM으로 복원하는 것입니다.
VMDK 크기가 조정된 후 수행된 백업은 정상적으로 성공합니다.
Affected Products
PowerProtect Data Manager, PowerProtect SoftwareArticle Properties
Article Number: 000216495
Article Type: Solution
Last Modified: 11 Dec 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.