PowerProtect: NTP: Zeitzonenproblem – ErrorResponse [code=404, reason=Die angegebene Zeitzonen-ID ist ungültig

Summary: Der Network Time Protocol-Server meldet beim Versuch, GMT +1 einzurichten, den Fehler 404 einer ungültigen Zeitzone

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Error: 
404: The specified Timezone ID is not valid.
Specify a valid Timezone ID

Das Protokoll: sysmgr.log Pfad: /var/log/brs/sysmgr/sysmgr.log 
./var/log/brs/sysmgr/sysmgr.log:2024-02-15T16:10:00.069Z ERROR [] [https-jsse-nio-8453-exec-5] [00000000-0000-4000-a000-000000000000][][][TRACE_ID:8b4e########d560][] [c.e.b.s.r.v.AbstractRESTMessageHandler.buildErrorResponse(343)] -  ErrorResponse: ErrorResponse [code=404, reason=The specified TimeZone ID is not valid., remediation=Specify a valid TimeZone ID., timestamp=1708013400069, path=/api/v2/timezones]
./var/log/brs/sysmgr/sysmgr.log:2024-02-15T16:14:01.311Z ERROR [] [https-jsse-nio-8453-exec-1] [00000000-0000-4000-a000-000000000000][][][TRACE_ID:b1dc2e25b3180d91][] [c.e.b.s.r.v.AbstractRESTMessageHandler.buildErrorResponse(343)] -  ErrorResponse: ErrorResponse [code=404, reason=The specified TimeZone ID is not valid., remediation=Specify a valid TimeZone ID., timestamp=1708013641311, path=/api/v2/timezones]
./var/log/brs/sysmgr/sysmgr.log:2024-02-15T18:08:25.154Z ERROR [] [https-jsse-nio-8453-exec-7] [00000000-0000-4000-a000-000000000000][][][TRACE_ID:96cc9d32f169b1a9][] [c.e.b.s.r.v.AbstractRESTMessageHandler.buildErrorResponse(343)] -  ErrorResponse: ErrorResponse [code=404, reason=The specified TimeZone ID is not valid., remediation=Specify a valid TimeZone ID., timestamp=1708020505154, path=/api/v2/timezones]
./var/log/brs/sysmgr/sysmgr.log:2024-02-15T18:08:25.234Z ERROR [] [https-jsse-nio-8453-exec-8] [00000000-0000-4000-a000-000000000000][][][TRACE_ID:a1c2########a87f][] [c.e.b.s.r.v.AbstractRESTMessageHandler.buildErrorResponse(343)] -  ErrorResponse: ErrorResponse [code=404, reason=The specified TimeZone ID is not valid., remediation=Specify a valid TimeZone ID., timestamp=1708020505234, path=/api/v2/timezones]



PPDM_timeZone.PNG

Cause

Ungültige Zeitzonen-ID

Resolution

1. Überprüfen Sie den Status der Zeitzone.
TimeDateCtl-Status 
Sample Output:

admin@ppdm196:~> timedatectl status
      Local time: Fri 2024-02-02 09:08:07 PST
  Universal time: Fri 2024-02-02 17:08:07 UTC
        RTC time: Fri 2024-02-02 17:08:07
       Time zone: PST8PDT (PST, -0800)
 Network time on: no
NTP synchronized: yes
 RTC in local TZ: no

2. Überprüfen Sie den NTP-Servernamen oder die IP-Adresse.
chronyc sources -v
  
Sample Output:

admin@ppdm:~> chronyc sources -v

  .-- Source mode  '^' = server, '=' = peer, '#' = local clock.
 / .- Source state '*' = current best, '+' = combined, '-' = not combined,
| /             'x' = may be in error, '~' = too variable, '?' = unusable.
||                                                 .- xxxx [ yyyy ] +/- zzzz
||      Reachability register (octal) -.           |  xxxx = adjusted offset,
||      Log2(Polling interval) --.      |          |  yyyy = measured offset,
||                                \     |          |  zzzz = estimated error.
||                                 |    |           \
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^* DC.amer.lan                   2   6   377    30   -559us[  +64us] +/-   54ms

cat /etc/chrony.conf 
Sample Output:

admin@ppdm:~> cat /etc/chrony.conf
server 192.168.9.100 iburst

3. Führen Sie eine Abfrage aus, um den gewünschten Zeitzonennamen in der Liste zu finden.
timedatectl list-timezones | grep -i toronto 
Sample Output:

admin@ppdm:~> timedatectl list-timezones  | grep -i toronto
America/Toronto

4. Legen Sie die Zeitzone fest.
timedatectl set-timezone Amerika/Toronto 
Sample Output:

admin@ppdm196:~> timedatectl set-timezone America/Toronto
==== AUTHENTICATING FOR org.freedesktop.timedate1.set-timezone ===
Authentication is required to set the system timezone.
Authenticating as: root
Password:
==== AUTHENTICATION COMPLETE ===
admin@ppdm196:~> timedatectl status
      Local time: Fri 2024-02-02 12:09:06 EST
  Universal time: Fri 2024-02-02 17:09:06 UTC
        RTC time: Fri 2024-02-02 17:09:06
       Time zone: America/Toronto (EST, -0500)
 Network time on: no
NTP synchronized: yes
 RTC in local TZ: no

5. Überprüfen Sie den Status der Zeitzone.
TimeDateCtl-Status 
Beispielausgabe:

admin@ppdm196:~> timedatectl-Status
      Ortszeit: Fri 02.02.2024 09:08:07 PST
  Weltzeit: Fr 02.02.2024 17:08:07 UTC
        RTC-Zeit: Fri 2024-02-02 17:08:07
       Zeitzone: PST8PDT (PST, -0800)
 Netzwerkzeit ein: nein
NTP synchronisiert: ja
 RTC in lokalem TZ: nein
Article Properties
Article Number: 000222172
Article Type: Solution
Last Modified: 23 Oct 2024
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.