Unisphere For PowerMax: How to configure SNMP notification?

Unisphere For PowerMax supports SNMPv1, SNMPv3, SNMPv3 with TLS notifications
 

To set up SNMP (SNMPv1 or SNMPv3 or SNMPv3 with TLS) notifications:

Steps

1. Select .
2. Select Alerts > Notifications to open the Notifications page.
3. In the SNMP part of the panel, click Configure.
4. View the SNMP trap destinations already added. The IP address/host full name, port, SNMP version and user name are displayed for each destination.
5. Click Add to add an SNMP trap destination.
6. Enter an IP Address or Host Name.
7. Enter a port number.
8. Do one of the following:
   • V1
     • Select the V1 radio button.
     • Click OK.
   •  V3
     • Select the V3 radio button.
     • Enter a user name.
     • Enter a password and confirm it.
     • Enter a password phrase and confirm it.
     • Click OK.
   •  V3 with TLS
     • Select the V3 with TLS radio button.
     • Click DOWNLOAD to download a Storevntd certificate.
     • Click Choose File to select a Server Certificate Authority file.
     • Enter a security name.
     • Click OK.
9. To verify the SNMP configuration, click VERIFY.
10. Optional: To edit the SNMP notification configuration, select it and click  .
11. Optional: To delete the SNMP notification configuration, select it and click   
12. Click OK.

SNMPv1:




SNMPv3:




SNMPv3 with TLS:




Once the above SNMP configuration done. Set the alert notification as per your requirement:
 

Steps

• To enable alert notifications:
  •  Select  to open the Settings panel.
  • Select Alerts > Notifications to open the Notifications page.

Setup the alert policy depending on which alerts you want to forward over SNMP server:
 

Steps

1. Select  to open the Settings panel.
2. Select Alerts > Alert Policies.
3. Select all or a specific storage system from the Select Array drop-down list.

To configure SNMP v3 with TLS  refer this link
For MIB files refer this Link