Connectrix B-serie: MAPS-daemon eindigt en zorgt ervoor dat CP's niet meer synchroon lopen in Fabric OS 7.3.x-code.

Summary: Maps daemon (MDD) wordt beëindigd en zorgt ervoor dat de CP's niet meer synchroon lopen.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Milieu:
EMC Hardware: Connectrix ED-DCX-B
EMC Hardware: Connectrix ED-DCX-4S
EMC hardware: Connectrix ED-8510-4B
EMC hardware: Connectrix ED-8510-8B
software: Probleem met Fabric OS 7.3.1
 
:
1. HA out of sync message in the errdump occuring every minute:
2017/02/17-07:49:24, [MAPS-1020], 32312, SLOT 6 | FID 128, WARNING, DCX, Switch wide status has changed from HEALTHY to MARGINAL..
2017/02/17-07:50:24, [MAPS-1020], 32313, SLOT 6 | FID 128, WARNING, DCX, Switch wide status has changed from MARGINAL to HEALTHY.
2017/02/17-07:51:24, [MAPS-1020], 32314, SLOT 6 | FID 128, WARNING, DCX, Switch wide status has changed from HEALTHY to MARGINAL.
2017/02/17-07:52:24, [MAPS-1020], 32315, SLOT 6 | FID 128, WARNING, DCX, Switch wide status has changed from MARGINAL to HEALTHY.

De Maps daemon (MDD) eindigt na een periode:
[KSWD-1002], 51122/32327, SLOT 6 | FFDC | CHASSIS, WARNING, DCX, Detected termination of process mdd:2209., hasm_swd.c, line: 191, comp:insmod, ltime:
[FSSM-1003], 51123/32328, SLOT 7 | CHASSIS, WARNING, DCX, HA State out of sync., OID:0x003e0007, hasm_sgi.c, line: 2139, comp:hamd, ltime:
[RAS-5001], 51124/0, SLOT 6 | CHASSIS, INFO, DCX, Message KSWD-1002 caused FFDC event, ffdcd.c, line: 1030, comp:raslogd, ltime:
[RAS-1001], 51125/32329, SLOT 6 | CHASSIS, INFO, DCX, First failure data capture (FFDC) event occurred., ffdcd.c, line: 1031, comp:raslogd, ltime:
 
2. Een ander probleem is dat een Maps daemon (MDD) in paniek raakt en opnieuw opstart bij actieve CP. Als gevolg hiervan verliest de director de HA SYNC-status.

Cause

MAPS-daemon is beëindigd vanwege een NULL-pointerreferentie in de code. De MAPS-daemon raakte in paniek en startte niet opnieuw op op de actieve CP, met als gevolg dat de director HA SYNC verloor. Dit gebeurt wanneer stand-by-CP vaak in en uit defecte status is en HA niet kan worden hersteld, zelfs niet na vervanging van stand-by-CP.

Resolution

Oplossing:
upgrade naar Fabric OS-versie 7.4.1e, 7.4.2, 8.0.2 of 8.1.0.
 
Tijdelijke oplossing: 
Plan voor probleem 2 een onderhoudsvenster en start de actieve CP opnieuw op, wat storend is omdat de CP's niet synchroon lopen.

Additional Information

Brocade DEFECT000618464

Affected Products

Connectrix

Products

Connectrix, Connectrix ED-DCX8510-4B, Connectrix ED-DCX8510-8B
Article Properties
Article Number: 000052608
Article Type: Solution
Last Modified: 29 Jul 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.