PowerScale：流经非复制池的 SyncIQ 流量

Summary: 当未设置标记“强制接口=否”和“限制目标网络=否”时，复制流量流经非复制池。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

如果未设置以下标记，在某些情况下，复制流量会流经非复制池，从而导致拥塞和性能问题。 
Force Interface: No
Restrict Target Network: No 

Cause

默认情况下，路由表上的默认路由用于确定流量 ORIGINES 源自的接口。

如果未设置“强制接口”和“限制目标网络”这两个标记，则会使用路由表，并且在非复制网络池中会看到流量。

Resolution

行动计划：
  1. 确定要修改的策略，并查看选项设置是否正确。
# isi sync policies view --policy=test | egrep 'Name:|Subnet|Pool|Force|Target:|Restrict'
示例： 
Isilon02-3# isi sync policies view --policy=test | egrep 'Name:|Target:|Subnet|Pool|Force|Restrict'
                                 Name: test
                               Target: target1.local
                        Source Subnet: Subnet1
                          Source Pool: Replication
                      Force Interface: No
              Restrict Target Network: No
  1. 设置标记以限制流向正确源网络和目标网络的流量，并验证更改。
# isi sync policies modify test --force-interface=yes --restrict-target-network=yes
# isi sync policies view --policy=test | egrep 'Name:|Subnet|Pool|Force|Target:|Restrict'

示例：

Isilon02-3# isi sync policies modify test --force_interface=yes --restrict-target-network=yes
Isilon02-3# isi sync policies view --policy=test | egrep 'Name:|Subnet|Pool|Force|Target:|Restrict'
                                 Name: test
                               Target: target1.local
                        Source Subnet: Subnet1
                          Source Pool: Replication
                      Force Interface: Yes
              Restrict Target Network: Yes

Affected Products

Isilon

Products

Isilon, Isilon SyncIQ
Article Properties
Article Number: 000161139
Article Type: Solution
Last Modified: 17 Dec 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.