Dell Unity：如何使用 CLI 設定 ESRS 整合

Summary: 以下是在 Unity 陣列上使用 CLI 啟用 ESRS 整合所可採取的步驟。(使用者可修正)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

本知識文章旨在逐步說明使用 CLI 配置和隨需分配整合在 Unity 陣列上的 ESRS 所需的步驟。

步驟 1：設定聯絡人資訊
以下命令用於顯示和設置聯繫人資訊。

uemcli -u local/admin -securepassword /sys/info show
uemcli -u local/admin -securepassword /sys/info set -contactFirstName <First> -contactLastName <Last> -contactEmail <Email> -contactPhone <Phone#>

步驟 2：驗證 EMC 線上支援帳戶。
下列命令可用來顯示和設定用於註冊 Unity 陣列的 EMC 線上支援帳戶。

uemcli -u local/admin -securepassword /sys/support/account show
uemcli -u local/admin -securepassword /sys/support/account set -user <EMC Online Support account> -passwdSecure <pass>

步驟 3：查看 EULA。
下列命令可用來顯示和接受 EULA 授權。

uemcli -u local/admin -securepassword /sys/support/esrsi show
uemcli -u local/admin -securepassword /sys/support/esrsi set -acceptEula yes   (***If not already accepted***)

步驟 4：執行網路檢查的 ESRS。

uemcli -u local/admin -securepassword /sys/support/esrsi checkNetwork

第 5 步：請求存取代碼
下列命令用於向 support.emc.com 要求存取代碼。這個存取代碼會傳送至步驟 2 中指定的 EMC 線上支援帳戶電子郵件。

uemcli -u local/admin -securepassword /sys/support/esrsi requestAccessCode

步驟 6：查看網站資訊。
以下命令用於查看和驗證您的帳戶有權訪問的一個或多個網站。

uemcli -u local/admin -securepassword /sys/support/esrsi/site show -accessCode <code> -detail

步驟 7：在 SiteId 上啟用 ESRS。
下列命令是最後一個步驟，您可以使用步驟 6 的網站 ID 為陣列啟用 ESRS。如果在步驟 6 中傳回多個站點，請確定指定了正確的站點。

uemcli -u local/admin -securepassword /sys/support/esrsi set -enable yes -siteId <siteid>

CLI 的命令輸出

 13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Contact first name    =
      Contact last name     =
      Contact company       =
      Contact email address =
      Contact phone number  =
      Location name         =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info set -contactFirstName John -contactLastName Doe -contactEmail Globe@myCompany.com -contactPhone 1234567890

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Support user name =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account set -user Globe@myCompany.com -passwdSecure

Password:
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Enabled       = no
      EULA accepted = no

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -acceptEula yes

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:00:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi checkNetwork

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:14:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi requestAccessCode

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Recipient email address =  G*****@myCompany.com.

Operation completed successfully.

21:15:22 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi/site show -accessCode 123456 -detail

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Site ID          = 123456
      Party ID         = 987654321
      Site name        = My Company
      Site description =
      Address          = 123 My Address
      State            = MA
      Country          = US
      Country name     =
      City             = Hopkinton
      Current location = yes

21:20:46 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -enable yes -siteId 123456

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

 

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F , Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid ...
Article Properties
Article Number: 000022686
Article Type: How To
Last Modified: 27 Nov 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.