Data Domain:レプリケーションの初期化が進行中で、アップグレードを続行できない
Summary: この記事では、ディレクトリーの初期化フェーズ中にDD OSのアップグレードが失敗し、「WARNING: レプリケーションの初期化が進行中で、アップグレードを続行できません。」
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
症状:
DD OSアップグレードの事前チェックが次のエラーで失敗します。
Error: Replication initialization is in progress, and upgrade cannot proceed.
解決策:
- Data Domainがレプリケーション用に構成されているかどうか、およびレプリケーションが初期化中の状態であるかどうかを確認します。
#replication show config ------> (To check if the replication pair has configured) #replication watch rctx:// ------> (Provide the context number to check the replication status) #replication watch rctx://1 Use Control-C to stop monitoring. (0:00:00) Replication initialize started... (0:00:10) 1%: initializing 3/3^C
- レプリケーションの初期化が第3フェーズであるため、レプリケーションのステータスを確認します。ユーザーは、レプリケーションの初期化が完了するまで待機する必要があります。
# replication status rctx://1 CTX: 1 Mode: source Destination: mtree://ddve3010.dd.lab/data/col1/oracle-se2 Enabled: yes Low bandwidth optimization: disabled Replication encryption: disabled Replication propagate-retention-lock: enabled Local filesystem status: enabled Connection: connected since Fri Oct 12 12:37:24 State: initializing 3/3 1% ----> (Check how much the initialization completed) Error: no error Sync'ed-as-of time: - Current throttle: 8192K bps Max-repl-streams: 8 (default)
- ユーザーが最初にData Domainをアップグレードする場合は、レプリケーションを切断する必要があります。
#replication break rctx:// ------> (Provide the context number to break the replication pair)
- レプリケーションが壊れた後、DD OSをアップグレードします。
- 両方のData Domainで次のコマンドを実行して、レプリケーション ペアを再構成します。
#replication add source mtree://system_DD1 destination mtree://system_DD2
Affected Products
Data DomainProducts
Data DomainArticle Properties
Article Number: 000014079
Article Type: How To
Last Modified: 14 Apr 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.