Configurações do BIOS para permitir a inicialização PXE em determinados notebooks Dell Latitude

Summary: Este artigo serve como um guia para definir as configurações do BIOS para permitir a inicialização PXE em determinados notebooks Dell Latitude.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Como acessar o BIOS ou a UEFI (também conhecida como Configuração do sistema)?

Para acessar o BIOS ou UEFI em um computador Dell, pressione a tecla F2 várias vezes na tela do logotipo da Dell durante a inicialização.
Como alternativa, pressione a tecla F12 várias vezes na tela do logotipo da Dell durante a inicialização e selecione BIOS Setup ou System Setup no menu.

Quando você estiver na tela do BIOS, as seguintes configurações do BIOS devem estar em vigor para inicialização PXE em notebooks Latitude. Existem diferentes interfaces de usuário do BIOS encontradas no notebook Latitude, dependendo do modelo que você usa.


Nota: Verifique se você fez download e instalou a atualização mais recente do BIOS disponível para seu notebook Latitude no Suporte Dell | Site Drivers & Downloads na categoria BIOS .

Cause

Nenhuma informação de causa disponível.

Resolution

Ativar a inicialização PXE no BIOS para Latitude 7x10 e 7x00

  1. Vá para General > Boot Sequence e selecione para ativar o Windows Boot Manager.

    Sequência de boot do Latitude

  2. Vá para General > Advanced Boot Options e selecione Enable UEFI Network Stack em:

    Enable UEFI Network Stack no Latitude

  3. Como esses modelos de notebook Latitude mais recentes não têm uma conexão NIC, verifique para ativar Enable USB Boot Support em System Configuration >USB Configuration (Figura 3):

    Enable USB Boot Support do Latitude

  4. Marque para ativar o Thunderbolt, Ativar o suporte à inicialização do Thunderbolt e Ativar os módulos de pré-inicialização do TBT (e PCIE atrás de TBT) em Configuração do sistema - Configuração do> adaptador Thunderbolt, mesmo se você não estiver se conectando a uma dock station Thunderbolt:

    Enable Thunderbolt Boot Support no Latitude

  5. Dependendo de como o servidor PXE está configurado, pode ser necessário desativar temporariamente Secure Boot Enable em General-Secure> Boot-Secure> Boot Enable até que a implementação da imagem seja concluída (Figura 5):

    Desativar o Secure Boot no Latitude

  6. Em Post Behavior, Fastboot deve ser definido como Thorough:

    Fastboot — Thorough no Latitude

Nota: As Docks Dell que usam drivers Display-Link (por exemplo, as séries D6000 e D3100) não permitem a inicialização PXE. Os drivers para essas docking stations não são carregados em um ambiente pré-Windows. Embora a Dell não recomende a inicialização PXE por meio de uma conexão de docking station, você pode fazer isso usando um dongle USB tipo C para Ethernet (como o Dell SKU 470-ABND) para concluir a inicialização PXE.

Ativar a inicialização PXE no BIOS para Latitude 7x20 e 7x30

  1. Selecione Connection e, em seguida, certifique-se de que Enable UEFI Network Stack esteja definido como Enabled.

    Enable UEFI Network Stack no BIOS

  2. Selecione Integrated Devices.
  3. Role para baixo para ver USB/Thunderbolt Configuration e selecione Enable USB Boot Support.

    Enable USB and Thunderbolt Boot Support

  4. Certifique-se de que Enable Thunderbolt Boot Support esteja definido como ON.
  5. Clique em Apply Changes para salvar as alterações.

Additional Information

Affected Products

Latitude 7200 2-in-1, Latitude 7210 2-in-1, Latitude 7300, Latitude 7310, Latitude 7320, Latitude 7320 Detachable, Latitude 7330, Latitude 7400 2-in-1, Latitude 7400, Latitude 7410, Latitude 7420, Latitude 7430, Latitude 7520, Latitude 7530
Article Properties
Article Number: 000131551
Article Type: Solution
Last Modified: 22 May 2025
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.