Article Number: 000132044
No Boot Image Loading Progress Bar When Booting From PXE To Deploy Operating System Via Windows Deployment Service
Summary: How to get the loading progress bar to show when PXE booting to deploy an Operating System with Windows Deployment Service.
Article Content
Symptoms
This article contains information about no loading progress bar showing when booting from PXE to deploy an Operating System (OS) via Windows Deployment Service (WDS).
No Loading Progress Bar Shown
When you PXE boot to the Windows Deployment Service to deploy an OS to install, you may not see a loading progress bar. This is because the wdsmgfw.efi on some PXE servers switch to the wgl4 font without using the adjusted resolution acquired from bootmgr.efi.
This leads to the display being mismatched while files load from the wdsmgfw.efi. So, while the booting image is loading, the loading progress bar will not be displayed as expected (Figure 1 and 2).
Figure 1
Figure 2
Affected systems:
- Inspiron 5402
- Inspiron 5409
- Inspiron 7500
- Inspiron 7501
- Inspiron 5502
- Inspiron 5509
- Latitude 3410
- Latitude 3510
- Vostro 5402
- Vostro 5502
- Vostro 7500
Solution
To fix this behavior, you must remove the font file "wgl4_boot.ttf" under the "Boot\Fonts" folder which contains the booting image for WDS.
If you have further questions about this article, contact Dell Technical Support.
Article Properties
Affected Product
Inspiron 7500, Inspiron 7501, Latitude 3410, Latitude 3510, Vostro 7500
Last Published Date
21 Feb 2021
Version
3
Article Type
Solution