标记失败，并显示错误：读取打开错误：命令已成功完成（驱动器状态为驱动器正在加载磁带）”

Summary: 标记或装载磁带卷失败，并显示以下错误： “读取卷标签时出错：读取打开错误：命令成功完成（驱动器状态为驱动器正在加载磁带）”

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

在用于标记或装载磁带卷操作的守护程序日志中观察到以下错误：

Linux：/nsr/logs/daemon.raw
窗户：[NetWorker 安装驱动器]：\Program Files\EMC NetWorker\nsr\logs\daemon.raw

NetWorker：如何使用nsr_render_log呈现.raw日志文件

<device_name> moving: read open error: command completed successfully (drive status is The drive is in the process of loading a tape)"
<device_name> reading : read open error: command completed successfully (drive status is The drive is in the process of loading a tape)"
NSR info media warning: The drive is in the process of loading a tape

Cause

原因未知。

Resolution

  1. 从 NetWorker Management Console （NMC） 访问 设备->库下的库。
  2. 右键单击库，然后选择“属性”。
  3. 选择计时器选项卡，然后将负载睡眠计时器更改为更高的值。例如，如果将其设置为 5（秒），请将其增加到 60。
提醒：如果属性中不存在“计时器”选项卡。关闭属性窗口，并确保在 NMC 中启用了 View-Diagnostic>Mode。启用 诊断模式 后，再次访问库属性。
  1. 更新负载睡眠定时器后，尝试标记。

Affected Products

NetWorker Family, NetWorker
Article Properties
Article Number: 000233972
Article Type: Solution
Last Modified: 18 Nov 2024
Version:  1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.