ECS: Düğümdeki SSH Hız Sınırlayıcı Nedeniyle Düğüm Kilitleme Başarısız Oluyor

Summary: ECS 4.0 a yükselttikten sonra düğümde bir SSH hız sınırlayıcı etkinse düğümü kilitleme girişimleri başarısız olabilir. Bu, düğüm durumunun ECS web kullanıcı arayüzünde "bilinmiyor" veya "kilitli" olarak görünmesine neden olurken SSH erişimi kullanılabilir durumda kalır. SLES15 ile uyumlu olmayan bir SSH hız sınırlayıcı uygulayan bir STIG kuralı bu soruna neden olur. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

ECS 4.0'a yükseltme sonrasında gözlemlenen sorun.

Düğüm durumu, ECS web kullanıcı arayüzünde "bilinmiyor" veya "kilitli" olarak görünüyor.

CLI lockdown komutu çalışmıyor.

Düğüme SSH erişimi, kilitleme girişimine rağmen kullanılabilir durumda kalır.

Düğüm durumu, ECS web kullanıcı arayüzünde  

Cause

STIG kuralı (SLES-12-030040) kullanılarak uygulanan bir SSH hız sınırlayıcının varlığı bu soruna neden olur. Bu kural SLES15 ile uyumlu değildir ve bir kez uygulandıktan sonra SLES12 STIG çerçevesi kullanılarak geri alınamaz.

Aşağıdaki komut, işletim sistemi hakkındaki bilgileri gösterir:

admin@node1:~> cat /etc/os-release
NAME="SLES"
VERSION="15-SP4"
VERSION_ID="15.4"
PRETTY_NAME="SUSE Linux Enterprise Server 15 SP4"
ID="sles"
ID_LIKE="suse"
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:suse:sles:15:sp4"
DOCUMENTATION_URL="https://documentation.suse.com/"

Resolution

Sorunu çözmek için SSH hız sınırlayıcısını etkilenen düğümden veya düğümlerden kaldırın:

  1. SSH hız sınırlayıcısını kontrol edin: 
admin@node1:~> sudo iptables -L | grep limit  | grep ssh
LOG        tcp  --  anywhere             anywhere             limit: avg 3/min burst 5 tcp dpt:ssh ctstate NEW recent: CHECK seconds: 60 hit_count: 3 name: ssh side: source mask: 255.255.255.255 LOG level warning tcp-options ip-options prefix "SFW2-INext-DROPr "
  1. STIG kuralını geri alın:
admin@node1:~> cd /opt/emc/security/hardening/root/sbin; sudo ./revert-harden -i SLES-12-030040
Changes reverted: FW_SERVICES_ACCEPT_EXT="0/0,tcp,22,,hitcount=3,blockseconds=60,recentname=ssh"
FW_SERVICES_ACCEPT_EXT="0/0,tcp,22,,hitcount=3,blockseconds=60,recentname=ssh"
Changes reverted: TCP="ssh"
Restarting SuSEfirewall2.service ...
SuSEfirewall2.service restarted successfully.
Reverted STIG ID: SLES-12-030040 on /etc/sysconfig/SuSEfirewall2.d/services/sshd successfully
  1. Değişiklikleri doğrulayın:
admin@node1:/opt/emc/security/hardening/root/sbin> sudo iptables -L | grep limit  | grep ssh
  1. WEB UI veya CLI kullanarak düğümü kilitleyin:
admin@node1:~> sudo -i lockdown set lock
[lockdown] :Info: Suspend fabric agent firewall check
INFO: Parsing /opt/emc/nile/etc/conf/nan/emc-firewall-cfg
dev_ext: public - dev_int: private private.4 pslave-0 pslave-1
INFO: Updating /etc/sysconfig/SuSEfirewall2.d/services/emc-ecs-custom
INFO: Updating /etc/sysconfig/SuSEfirewall2
<38>Jun 25 10:34:47 SuSEfirewall2[32514]: Firewall rules unloaded.
<38>Jun 25 10:34:47 SuSEfirewall2[32594]: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
<38>Jun 25 10:34:47 SuSEfirewall2[32594]: using default zone 'ext' for interface docker0
<38>Jun 25 10:34:47 SuSEfirewall2[32594]: using default zone 'ext' for interface public_mgmt
<38>Jun 25 10:34:47 SuSEfirewall2[32594]: using default zone 'ext' for interface slave_0
<38>Jun 25 10:34:47 SuSEfirewall2[32594]: using default zone 'ext' for interface slave_1
<38>Jun 25 10:34:47 SuSEfirewall2[32594]: Firewall custom rules loaded from /opt/emc/nile/etc/conf/nan/nan_pbr_rules
<38>Jun 25 10:34:48 SuSEfirewall2[32594]: /proc/sys/net/ipv4/conf/all/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:48 SuSEfirewall2[32594]: /proc/sys/net/ipv4/conf/default/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:48 SuSEfirewall2[32594]: /proc/sys/net/ipv4/conf/docker0/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:48 SuSEfirewall2[32594]: /proc/sys/net/ipv4/conf/lo/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:48 SuSEfirewall2[32594]: /proc/sys/net/ipv4/conf/private/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:48 SuSEfirewall2[32594]: /proc/sys/net/ipv4/conf/pslave-0/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:48 SuSEfirewall2[32594]: /proc/sys/net/ipv4/conf/pslave-1/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:48 SuSEfirewall2[32594]: /proc/sys/net/ipv4/conf/public/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:48 SuSEfirewall2[32594]: /proc/sys/net/ipv4/conf/slave-0/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:49 SuSEfirewall2[32594]: /proc/sys/net/ipv4/conf/slave-1/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:49 SuSEfirewall2[32594]: Firewall rules successfully set
INFO: Updating /etc/sysconfig/SuSEfirewall2
<38>Jun 25 10:34:57 SuSEfirewall2[35003]: Firewall rules unloaded.
<38>Jun 25 10:34:57 SuSEfirewall2[35084]: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
<38>Jun 25 10:34:57 SuSEfirewall2[35084]: using default zone 'ext' for interface docker0
<38>Jun 25 10:34:57 SuSEfirewall2[35084]: using default zone 'ext' for interface public_mgmt
<38>Jun 25 10:34:57 SuSEfirewall2[35084]: using default zone 'ext' for interface slave_0
<38>Jun 25 10:34:57 SuSEfirewall2[35084]: using default zone 'ext' for interface slave_1
<38>Jun 25 10:34:57 SuSEfirewall2[35084]: Firewall custom rules loaded from /opt/emc/nile/etc/conf/nan/nan_pbr_rules
<38>Jun 25 10:34:57 SuSEfirewall2[35084]: /proc/sys/net/ipv4/conf/all/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:57 SuSEfirewall2[35084]: /proc/sys/net/ipv4/conf/default/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:57 SuSEfirewall2[35084]: /proc/sys/net/ipv4/conf/docker0/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:57 SuSEfirewall2[35084]: /proc/sys/net/ipv4/conf/lo/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:57 SuSEfirewall2[35084]: /proc/sys/net/ipv4/conf/private/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:58 SuSEfirewall2[35084]: /proc/sys/net/ipv4/conf/pslave-0/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:58 SuSEfirewall2[35084]: /proc/sys/net/ipv4/conf/pslave-1/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:58 SuSEfirewall2[35084]: /proc/sys/net/ipv4/conf/public/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:58 SuSEfirewall2[35084]: /proc/sys/net/ipv4/conf/slave-0/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:58 SuSEfirewall2[35084]: /proc/sys/net/ipv4/conf/slave-1/rp_filter override in /etc/sysctl.d/70-nan-performance.conf, not setting it
<38>Jun 25 10:34:59 SuSEfirewall2[35084]: Firewall rules successfully set
locked
[lockdown] :Info: Resume fabric agent firewall check

Additional Information

Bu geçici çözüm yalnızca SLES12 STIG çerçevesinin daha önce uygulanmış olduğu SLES15 çalıştıran düğümler için geçerlidir. STIG kurallarını uygulamadan veya geri döndürmeden önce uyumluluğu sağlayın.

Affected Products

ECS Appliance Gen 3, ECS Appliance Hardware Gen3 EX500, ECS Appliance Hardware Series

Products

ECS, ObjectScale, ECS Appliance Hardware Gen3 EX5000, ECS Appliance, ECS Appliance Hardware Gen3 EX300, ECS Appliance Hardware Gen3 EX3000, ECS Appliance Hardware Gen3 EXF900, ECS Appliance Software with Encryption , ECS Appliance Software without Encryption ...
Article Properties
Article Number: 000337531
Article Type: Solution
Last Modified: 24 Sept 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.