How to Set Up Ubuntu on Your Dell PC After Installation
Summary: Set up Ubuntu on your Dell computer: install updates, add drivers, install apps, review settings, and upgrade to the latest Ubuntu LTS release.
Instructions
Quick answer
After you install Ubuntu on a Dell computer, install all available updates and restart, check Dell Support for BIOS updates, install any additional drivers, and review Settings. To use the latest Ubuntu release, upgrade to the latest Ubuntu LTS release with Software Updater.
About this guide
This guide is based on the Ubuntu version that Dell ships on most Ubuntu systems. The first section explains how to upgrade to the latest Ubuntu long-term support (LTS) release. The sections after it describe the version that Dell ships. Where the steps are different after you upgrade, a note marked If you upgraded describes the change.
To check which version is installed, open Settings, select About, and read the OS Name entry.
1. Upgrade to the latest Ubuntu release
The Ubuntu version that Dell ships continues to receive security updates until April 2029. Ubuntu 26.04 LTS (Resolute Raccoon) is the latest long-term support release, and Canonical supports it until April 2031. Upgrades to the latest release are free of charge.
Before you upgrade
- Back up your personal files. See section 12, Back up your files.
- Go to Dell Drivers & Downloads and check for BIOS and driver updates for your computer.
- Confirm that your computer meets the system requirements for the latest Ubuntu LTS release: a 2 GHz dual-core processor, 6 GB of RAM, and 25 GB of free storage space.
- Connect the computer to AC power and to a stable internet connection.
- Install all available updates and restart. See section 3, Install updates.
Upgrade with Software Updater
- Press the Super key (the key with the Windows logo), type Software Updater, and press Enter.
- Install any available updates. Restart the computer when prompted.
- Open Software Updater again. When the upgrade is available, the window shows a message that a new Ubuntu release is available. Select Upgrade….
- Enter your password when prompted.
- Review the release notes, and then select Upgrade.
- Follow the on-screen prompts. The upgrade can take an hour or more, depending on your internet connection. Do not turn off the computer or close the upgrade window.
- Restart the computer when prompted.
If Software Updater does not show the upgrade
Canonical makes the upgrade available gradually. To check your upgrade settings:
- Press the Super key, type Software & Updates, and press Enter.
- Select the Updates tab.
- Set Notify me of a new Ubuntu version to For long-term support versions.
- Close Software & Updates, and then open Software Updater again.
To start the upgrade from a terminal instead, install all updates, restart, and then run: sudo do-release-upgrade
What changes after you upgrade
- The desktop is GNOME 50. The desktop session runs on Wayland only. Applications written for X11 continue to run through XWayland.
- App Center manages applications. The Software & Updates app is no longer installed by default. To install it, run
sudo apt install software-properties-gtk. - Some default applications are replaced: Terminal is now Ptyxis, the video player is Showtime, the system monitor is Resources, the image viewer is Loupe, and the document viewer is Papers.
- Ubuntu turns off third-party software sources during the upgrade. Review them after the upgrade and turn on the ones you still need.
- To start an application at sign-in, use Settings > Apps. The Startup Applications app is no longer used.
For more information, see:
- Upgrade Ubuntu Desktop (Ubuntu Desktop documentation)
- Release notes for the latest Ubuntu LTS release
- Summary of changes for users upgrading from the previous LTS release
2. Sign in and learn the desktop
After the installation finishes and the computer restarts, the sign-in screen shows your user name. Select your user name, enter your password, and press Enter.
The Ubuntu desktop has three main parts:
- Top bar: Shows the Activities button, the date and time, and the system menu. Use the system menu to change the volume, connect to a network, turn on Bluetooth, adjust power mode, lock the screen, restart, or shut down.
- Dock: The bar of icons on the left side of the screen. It shows your favorite applications and the applications that are running.
- Activities overview: Press the Super key to open it. Type to search for applications, files, and settings. Select Show Apps to see all installed applications.
For a visual overview, see Visual overview of GNOME in the Ubuntu Desktop Guide.
3. Install updates
Install updates first. Updates include security fixes and improvements for Ubuntu and for the applications that are installed.
- Press the Super key, type Software Updater, and press Enter.
- If updates are available, select Install Now. Enter your password if prompted.
- When the installation finishes, select Restart Now if prompted.
To update from a terminal, run: sudo apt update && sudo apt full-upgrade
If you upgraded: When updates are available, a notification appears with options to open Software Updater or to install all updates. An icon in the top bar also shows that updates are available.
For more information, see Install or remove software.
4. Update the BIOS and firmware
A BIOS update can improve hardware compatibility and system stability. Dell provides two versions of system BIOS updates: a .exe file for Windows environments and a .rcv file for Linux environments. The .rcv file is a BIOS Recovery Image that your system’s hardware can read directly before the operating system loads.
Before you begin, ensure your Dell computer is connected to a reliable power source using its AC power adapter. Do not turn off your computer during the firmware update process.
- Go to Dell Drivers & Downloads.
- Enter your Service Tag or select your product.
- Select Ubuntu or Linux as the operating system, if it is listed, and review the available BIOS and firmware updates.
Prepare your USB flash drive
To install the recovery image, you must place the file on a properly formatted external USB storage device.
- Connect a USB flash drive to your Ubuntu system.
- Open the Disks application or use the Files app to ensure the drive is formatted as FAT32.
- Download the firmware update file from the Dell Drivers & Downloads website.
- Copy the downloaded file to the root directory (the top level) of your USB flash drive.
- If the file name includes extra characters or version numbers (for example,
XPS_9310_BIOS_IMG.rcv), right-click the file, choose Rename, and change it exactly to:BIOS_IMG.rcv
Install the update using the F12 Boot Menu
Your computer reads the recovery image directly through the built-in system hardware flash utility.
- Keep the prepared USB flash drive connected and restart your computer.
- As soon as the computer turns on and the Dell logo appears, press the F12 key repeatedly until the One-Time Boot Menu appears.
- Use the arrow keys to scroll down to BIOS Flash Update (on some models, this may be listed as BIOS Recovery), then press Enter.
- Click the Browse button (three dots) to view your storage devices.
- Select your USB drive, locate the
BIOS_IMG.rcvfile, and click OK. - Review the current and new version information on the screen, then click Begin Flash Update.
Your system will restart automatically and show a progress bar while applying the update. When the process completes, the computer will restart again and boot into Ubuntu.
Update automatically using the Terminal
Because Dell participates in the Linux Vendor Firmware Service (LVFS), you can often download and install the latest certified BIOS updates directly through the Ubuntu command line without downloading files manually.
- Open the Terminal application on your Ubuntu system.
- Type the following command to download the latest firmware metadata, then press Enter:
fwupdmgr refresh - Type the following command to see if a newer BIOS version is available for your specific hardware configuration, then press Enter:
fwupdmgr get-updates - If an update is available, type the following command to download and stage the installation, then press Enter:
fwupdmgr update - Follow the on-screen prompts to restart your system and complete the installation
5. Install drivers
Ubuntu includes drivers for most hardware. Some computers, such as those with NVIDIA graphics, can use additional drivers.
- Press the Super key, type Software & Updates, and press Enter.
- Select the Additional Drivers tab.
- Wait while Ubuntu searches for drivers.
- Select the driver that Ubuntu recommends, and then select Apply Changes.
- Restart the computer.
If you upgraded: Software & Updates may not be installed by default. To install the recommended driver from a terminal, run sudo ubuntu-drivers install --recommended.
For more information, see:
6. Connect to a network
Ubuntu uses NetworkManager to manage network connections.
Wi-Fi
- Select the system menu in the top bar.
- Select Wi-Fi, and then select Select Network.
- Select your network, and enter the password.
Wired network: Connect the network cable. The connection starts automatically.
VPN: Open Settings, select Network, and then select Add VPN (+).
For more information, see the Networking, web & email chapter of the Ubuntu Desktop Guide.
7. Review key settings
Open Settings from the system menu or from the Activities overview. Review these panels first.
|
Panel |
What to check |
|---|---|
|
Wi-Fi and Bluetooth |
Connect to your network and pair devices. |
|
Displays |
Set the resolution, scale, refresh rate, and arrangement of your displays. |
|
Sound |
Select the output and input devices, and set the volume. |
|
Power |
Select a power mode and set when the screen turns off and when the computer suspends. |
|
Keyboard and Mouse & Touchpad |
Add keyboard layouts, and adjust the pointer and touchpad speed. |
|
Region & Language |
Select your language, formats, and keyboard layouts. |
|
Date & Time |
Turn on automatic date and time, and select your time zone. |
|
Privacy & Security |
Set the screen lock, and control access to the camera, microphone, and location. |
|
Online Accounts |
Add accounts for email, calendar, and cloud storage. |
|
Users |
Change your password, and add or remove user accounts. |
|
Accessibility |
Change text size, contrast, and other features. |
To start an application when you sign in, press the Super key, type Startup Applications, and press Enter. Select Add, and then enter the application details. For more information, see Start an application at login.
If you upgraded: Use Settings > Apps to set an application to start at sign-in.
For a full list of settings, see User & system settings in the Ubuntu Desktop Guide.
8. Install and remove applications
Use App Center to install applications from Ubuntu. Applications are available as snap packages or as Debian (deb) packages. If an application is available in both formats, App Center lists the snap first.
Install an application
- Select the App Center icon in the dock.
- Search for an application, or select a category.
- Select the application, and then select Install.
- Enter your password when prompted.
Remove an application: Open App Center, select Manage, select the application, and then select Uninstall.
Install software only from sources that you trust. To use a software source other than the default Ubuntu sources, press the Super key, type Software & Updates, select the Other Software tab, and then select Add.
If you upgraded: Install software-properties-gtk to use Software & Updates. See the section What changes after you upgrade.
Default applications on the Ubuntu version that Dell ships
|
Application |
Use |
|---|---|
|
Firefox |
Web browser |
|
Thunderbird |
|
|
LibreOffice |
Documents, spreadsheets, and presentations |
|
Files |
File manager |
|
Text Editor |
Text files |
|
Terminal |
Command line |
|
Videos |
Video player |
|
Rhythmbox |
Music player |
|
Image Viewer |
Pictures |
|
Document Viewer |
PDF files |
|
Backups |
File backup |
To choose a different application for a file type, open Settings and select Default Apps.
For more information, see:
9. Enable media codecs
Some audio and video formats need extra codecs. If the installer offered third-party software and additional media formats and you selected that option, the codecs are already installed. Otherwise, install them:
- Press the Super key, type Terminal, and press Enter.
- Run the following command, and enter your password when prompted:
sudo apt install ubuntu-restricted-extras - Follow the prompts, and restart any open media applications.
For more information, see Playing restricted formats on the Ubuntu Community Help Wiki.
10. Set up displays, printers, webcams, and Bluetooth devices
Displays: Ubuntu detects connected displays automatically. To change the arrangement, open Settings and select Displays. You can extend the desktop across displays or mirror one display on another. For more information, see Set Up Multiple Monitors on Ubuntu.
Printers: Turn on the printer, and connect it with a USB cable or to the same network as your computer. Open Settings, select Printers, and then select Add Printer.
Webcams: Ubuntu detects webcams automatically. Select the webcam in the application that you use. For more information, see Use and Troubleshoot a Webcam on Ubuntu and the Ubuntu Webcam wiki page.
Bluetooth: Open Settings, select Bluetooth, turn on Bluetooth, and then select your device. For more information, see Troubleshoot Bluetooth.
11. Protect your system
- Keep Ubuntu updated. Install updates regularly. See section 3, Install updates.
- Use a strong password and a screen lock. Open Settings, select Users to change your password, and select Privacy & Security to set the screen lock.
- Turn on the firewall. Ubuntu includes the Uncomplicated Firewall (UFW), which is turned off by default. To check its status and turn it on, open Terminal and run
sudo ufw statusandsudo ufw enable. For a graphical tool, install Gufw from App Center. For more information, see UncomplicatedFirewall, UFW, and Gufw. - Review application permissions. Open Settings, select Privacy & Security, and review which applications can use the camera, microphone, and location.
- Consider disk encryption. Disk encryption is selected during installation. For more information, see Hardware-backed disk encryption.
- Learn about Ubuntu Pro. Ubuntu Pro adds extended security maintenance and other services. See the Ubuntu Pro documentation.
12. Back up your files
Back up your files regularly to an external drive or a network location. Ubuntu includes the Backups application.
- Press the Super key, type Backups, and press Enter.
- Select the folders to save and the folders to ignore.
- Select the storage location.
- Turn on automatic backups and select a schedule.
- Select Back Up Now to create the first backup.
For more information, see Backup your system on the Ubuntu Community Help Wiki.
13. Customize the desktop
- Background and appearance: Open Settings, and select Appearance to choose a light or dark style and an accent color. Select Background to choose a wallpaper or your own picture.
- Dock: Open Settings, select Ubuntu Desktop, and change the dock position, size, and behavior. To keep an application in the dock, right-click its icon and select Add to Favorites.
- Accessibility: See Accessibility for features such as screen reader, text size, contrast, and keyboard options.
- Terminal: To learn the command line, see The Linux command line for beginners.
14. Get more help
Software support is provided by Canonical:
- Ubuntu Desktop documentation
- Ubuntu Desktop Guide
- Ask Ubuntu and Ubuntu Discourse for community help
Frequently asked questions (FAQs)
Q: How do I check which Ubuntu version is installed?
A: Open Settings, select About, and read the OS Name entry.
Q: Is the upgrade to the latest Ubuntu release free?
A: Yes. Upgrades to the latest Ubuntu release are free of charge.
Q: Do I have to upgrade?
A: No. The Ubuntu version 24.04 that Dell ships continues to receive security updates until April 2029.
Q: Why does Software Updater not offer the upgrade?
A: Install all updates and restart. Then set Notify me of a new Ubuntu version to For long-term support versions in Software & Updates. See the section If Software Updater does not show the upgrade.
Q: How do I install applications on Ubuntu?
A: Open App Center, search for the application, and select Install.