NetWorker: Come ripristinare un file utilizzando la riga di comando.

Summary: Questo articolo della KB fornisce una panoramica su come eseguire il ripristino di file o cartelle di un client NetWorker.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

NOTA: Questo articolo fornisce una panoramica generale di un FLR da riga di comando di un client NetWorker. Per ulteriori informazioni, consultare il documento NetWorker Command Reference Guide, Support for NetWorker | Manuali e documenti
  1. Aprire un prompt dei comandi o una shell con privilegi elevati sul server NetWorker.
  2. Identificare l'ID del set di salvataggio (SSID) di un backup che si desidera ripristinare: mminfo -avot -q client=NETWORKER_CLIENT_NAME
NOTA: Il saveset deve essere contrassegnato come esplorabile (cb). NetWorker: Come rendere esplorabile un saveset scaduto
  1. Per elencare i contenuti del backup, ottenere il file nsavetime dell'SSID necessario per il ripristino: mminfo -q ssid=SSID -r nsavetime,client
  2. Elencare il contenuto del saveset (in alternativa, reindirizzare a un file): nsrinfo -t nsavetime CLIENT_NAME

Esempio:

E:\>nsrinfo -t 1562250655 client_name
scanning client `client_name' for savetime 1562250655(MM/DD/YYYY HH:MM:SS) from the backup namespace
E:\backup1\
E:\daemon.raw
E:\file1.txt
E:\gstd.raw
E:\gstdlog.txt
E:\renderedNsrck.txt
E:\   
7 objects found
  1. Eseguire nuovamente il comando recover sulla riga di comando del server NetWorker per eseguire il ripristino a livello di file: recover -c source_client_name -R destination_client_name -iR
    Esempio:
B:\>recover -c source_client_name -R destination_client_name -iR 
    No index was found for B:\. The current working directory is /.
    recover> cd E:\
    recover> ls
     backup1                gstd.raw               renderedNsrck.txt
     daemon.raw             gstdlog.txt
     file1.txt              ISNTOPV01_daemon.raw
    recover> version [displays all the latest backups performed for a save set E:\]

    Versions of `E:\':

        0 d                0 7/4/2019 07:20 \
         save time:  7/4/2019 7:30:55 AM
          location:  test.002 at test

     0 d                0 7/4/2019 07:20 \
     save time:  7/4/2019 7:21:04 AM
      location:  test.002 at test

     0 d                0 7/4/2019 05:52 \
     save time:  7/4/2019 7:03:48 AM
      location:  test.002 at test

    recover> changetime 7/4/2019 7:30:55 AM  [Performed E:\ backup for 3 times and selecting latest backup to perform recovery]
    18361:recover: time changed to 07/04/2019 07:30:55 (mm/dd/yyyy)
    recover> ls
     backup1                gstd.raw               renderedNsrck.txt
     daemon.raw             gstdlog.txt
     file1.txt              
    recover> add daemon.raw
    1 file(s) marked for recovery
    recover> relocate
    6479:recover: <return> will recover files into their original location
    New destination directory: F:\Test
    recover> recover
    Recovering 1 file from E:\ into F:\Test
    Volumes needed (all on-line):test.002 at test
    Total estimated disk space needed for recover is 229 KB.
    Requesting 1 file(s), this may take a while...
    Recover start time: 7/4/2019 7:46:58 AM
    Requesting 1 recover session(s) from server.
    129290:recover: Successfully established direct file retrieve session for save-set ID '4112387488' with adv_file volume 'test.002'.
    F:\Test\daemon.raw
    Received 1 file(s) from NSR server `networker_client_name'
    Recover completion time: 7/4/2019 7:47:01 AM
    recovery

Nell'esempio precedente, il file daemon.raw è stato ripristinato correttamente nel percorso F:\Test.

Additional Information

NetWorker: Come eseguire un "Ripristino del saveset" dalla riga di comando

Affected Products

NetWorker

Products

NetWorker
Article Properties
Article Number: 000019763
Article Type: How To
Last Modified: 26 Sept 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.