NetWorker：如何使用命令行恢复文件。

Summary: 本知识库文章概述了如何对 NetWorker 客户端执行文件或文件夹恢复。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

提醒：本文概述了 NetWorker 客户端的命令行 FLR。有关更多信息，请参阅 NetWorker Command Reference Guide， 支持 NetWorker |手册和文档
  1. 在 NetWorker 服务器上打开提升的命令提示符或 shell。
  2. 识别要恢复的备份的存储集 ID （SSID）： mminfo -avot -q client=NETWORKER_CLIENT_NAME
提醒：必须将存储集标记为可浏览 （cb）时，此方法起作用。NetWorker：如何使过期的存储集可浏览
  1. 要列出备份的内容，请获取 nsavetime 还原所需的 SSID： mminfo -q ssid=SSID -r nsavetime,client
  2. 列出存储集的内容（可选择重定向到文件）： nsrinfo -t nsavetime CLIENT_NAME

示例：

E:\>nsrinfo -t 1562250655 client_name
scanning client `client_name' for savetime 1562250655(MM/DD/YYYY HH:MM:SS) from the backup namespace
E:\backup1\
E:\daemon.raw
E:\file1.txt
E:\gstd.raw
E:\gstdlog.txt
E:\renderedNsrck.txt
E:\   
7 objects found
  1. 运行 recover NetWorker 服务器命令行上的命令，用于执行文件级恢复： recover -c source_client_name -R destination_client_name -iR
    示例：
B:\>recover -c source_client_name -R destination_client_name -iR 
    No index was found for B:\. The current working directory is /.
    recover> cd E:\
    recover> ls
     backup1                gstd.raw               renderedNsrck.txt
     daemon.raw             gstdlog.txt
     file1.txt              ISNTOPV01_daemon.raw
    recover> version [displays all the latest backups performed for a save set E:\]

    Versions of `E:\':

        0 d                0 7/4/2019 07:20 \
         save time:  7/4/2019 7:30:55 AM
          location:  test.002 at test

     0 d                0 7/4/2019 07:20 \
     save time:  7/4/2019 7:21:04 AM
      location:  test.002 at test

     0 d                0 7/4/2019 05:52 \
     save time:  7/4/2019 7:03:48 AM
      location:  test.002 at test

    recover> changetime 7/4/2019 7:30:55 AM  [Performed E:\ backup for 3 times and selecting latest backup to perform recovery]
    18361:recover: time changed to 07/04/2019 07:30:55 (mm/dd/yyyy)
    recover> ls
     backup1                gstd.raw               renderedNsrck.txt
     daemon.raw             gstdlog.txt
     file1.txt              
    recover> add daemon.raw
    1 file(s) marked for recovery
    recover> relocate
    6479:recover: <return> will recover files into their original location
    New destination directory: F:\Test
    recover> recover
    Recovering 1 file from E:\ into F:\Test
    Volumes needed (all on-line):test.002 at test
    Total estimated disk space needed for recover is 229 KB.
    Requesting 1 file(s), this may take a while...
    Recover start time: 7/4/2019 7:46:58 AM
    Requesting 1 recover session(s) from server.
    129290:recover: Successfully established direct file retrieve session for save-set ID '4112387488' with adv_file volume 'test.002'.
    F:\Test\daemon.raw
    Received 1 file(s) from NSR server `networker_client_name'
    Recover completion time: 7/4/2019 7:47:01 AM
    recovery

在上面的示例中，文件daemon.raw已成功恢复到 F：\Test位置。

Additional Information

NetWorker：如何从命令行执行“存储集恢复”

Affected Products

NetWorker

Products

NetWorker
Article Properties
Article Number: 000019763
Article Type: How To
Last Modified: 26 Sept 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.