NetWorker: How to Recover a file using Command line.

Summary: This KB provides an overview of how to perform a file or folder recovery of a NetWorker client.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

NOTE: This article provides a general overview of a command-line FLR of a NetWorker Client. For additional information, see the NetWorker Command Reference Guide, Support for NetWorker | Manuals & Documents
  1. Open an elevated command prompt or shell on the NetWorker server.
  2. Identify the Save Set ID (SSID) of a backup you would like to recover: mminfo -avot -q client=NETWORKER_CLIENT_NAME
NOTE: The save set must be marked as browsable (cb). NetWorker: How to make an expired save set browsable
  1. To list the contents of the backup, get the nsavetime of the SSID wanted for restore: mminfo -q ssid=SSID -r nsavetime,client
  2. List the contents of the save set (optionally redirect to a file): nsrinfo -t nsavetime CLIENT_NAME

Example:

E:\>nsrinfo -t 1562250655 client_name
scanning client `client_name' for savetime 1562250655(MM/DD/YYYY HH:MM:SS) from the backup namespace
E:\backup1\
E:\daemon.raw
E:\file1.txt
E:\gstd.raw
E:\gstdlog.txt
E:\renderedNsrck.txt
E:\   
7 objects found
  1. Run the recover command on NetWorker Server command line to do file level recovery: recover -c source_client_name -R destination_client_name -iR
    Example:
B:\>recover -c source_client_name -R destination_client_name -iR 
    No index was found for B:\. The current working directory is /.
    recover> cd E:\
    recover> ls
     backup1                gstd.raw               renderedNsrck.txt
     daemon.raw             gstdlog.txt
     file1.txt              ISNTOPV01_daemon.raw
    recover> version [displays all the latest backups performed for a save set E:\]

    Versions of `E:\':

        0 d                0 7/4/2019 07:20 \
         save time:  7/4/2019 7:30:55 AM
          location:  test.002 at test

     0 d                0 7/4/2019 07:20 \
     save time:  7/4/2019 7:21:04 AM
      location:  test.002 at test

     0 d                0 7/4/2019 05:52 \
     save time:  7/4/2019 7:03:48 AM
      location:  test.002 at test

    recover> changetime 7/4/2019 7:30:55 AM  [Performed E:\ backup for 3 times and selecting latest backup to perform recovery]
    18361:recover: time changed to 07/04/2019 07:30:55 (mm/dd/yyyy)
    recover> ls
     backup1                gstd.raw               renderedNsrck.txt
     daemon.raw             gstdlog.txt
     file1.txt              
    recover> add daemon.raw
    1 file(s) marked for recovery
    recover> relocate
    6479:recover: <return> will recover files into their original location
    New destination directory: F:\Test
    recover> recover
    Recovering 1 file from E:\ into F:\Test
    Volumes needed (all on-line):test.002 at test
    Total estimated disk space needed for recover is 229 KB.
    Requesting 1 file(s), this may take a while...
    Recover start time: 7/4/2019 7:46:58 AM
    Requesting 1 recover session(s) from server.
    129290:recover: Successfully established direct file retrieve session for save-set ID '4112387488' with adv_file volume 'test.002'.
    F:\Test\daemon.raw
    Received 1 file(s) from NSR server `networker_client_name'
    Recover completion time: 7/4/2019 7:47:01 AM
    recovery

In the above example, the file daemon.raw was successfully recovered to the F:\Test location.

Additional Information

NetWorker: How to perform a 'Save Set Recovery' from the Command Line

Affected Products

NetWorker

Products

NetWorker
Article Properties
Article Number: 000019763
Article Type: How To
Last Modified: 26 Sept 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.