Dell Networking PowerSwitch OS9: Slik aktiverer og administrerer du Link Layer Discovery Protocol

Riepilogo: Denne artikkelen forklarer hvordan du aktiverer og administrerer Link Layer Discovery Protocol (LLDP) på Dell Networking-svitsjer som kjører OS9.

Questo articolo si applica a Questo articolo non si applica a Questo articolo non è legato a un prodotto specifico. Non tutte le versioni del prodotto sono identificate in questo articolo.

Istruzioni

Mål

1. Viktige punkter
2. Konfigurere LLDP
2. Se LLDP-konfigurasjon
4. Vise informasjon som annonseres av nærliggende LLDP-agenter

 

Viktige poeng

  • LLDP er aktivert som standard fra og med fastvareversjon 9.2.0.2. LLDP for tidligere versjoner er deaktivert som standard.
  • Dell Networking-systemer støtter opptil åtte naboer per grensesnitt.
  • Dell Networking-systemer støtter maksimalt 8000 naboer totalt per system. Hvis antallet grensesnitt multiplisert med åtte overskrider maksimum, konfigurerer ikke systemet mer enn 8000.
  • Konfigurasjoner på grensesnittnivå overstyrer alle konfigurasjoner på konfigurasjonsnivå.

 

Konfigurere LLDP
 

Kommando

Purpose

FTOS# configure

Åpne konfigurasjonsmodus.

FTOS(config)# protocol LLDP

Åpne LLDP-modus.

FTOS(config-lldp)# no disable

Deaktivert: LLDP slås av globalt. Ikke deaktivert: LLDP slås på globalt. Ettersom protokollen ble introdusert som «deaktivert», slås protokollen på med det motsatte av dette.

FTOS(conf-if-te-0/10)#protocol lldp

Samme LLDP-modus finnes på grensesnittnivå. Alle spesifikke LLDP-moduskommandoer på grensesnittnivå overstyrer eventuelle globalt konfigurerte LLDP-parametre.

 

Vise LLDP-konfigurasjon

 

Dell(conf)# protocol lldp

Dell(conf-lldp)# show config
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description hello 10
no disable

Dell(conf-lldp)# exit

Dell(conf)# interface gigabitethernet 1/31

Dell(conf-if-gi-1/31)# show config
!
interface GigabitEthernet 1/31
no ip address
switchport
no shutdown
Dell(conf-if-gi-1/31)# protocol lldp

Dell(conf-if-gi-1/31-lldp)# show config
!
protocol lldp

Vise informasjon som annonseres av nærliggende LLDP-agenter
 

Vise kortfattet informasjon om nærliggende enheter.

show lldp neighbors

Vis all informasjon som naboer annonserer.

show lldp neighbors detail

 

Eksempel på visning av kortfattet informasjon annonsert av naboer

Dell(conf-if-te-0/3-lldp)# end

Dell (conf-if-te-0/3)# do show lldp neighbors

Loc      PortID      Rem Host Name        Rem Port Id                Rem Chassis Id
---------------------------------------------------------------------------------------------

Te 0/1                     -                     TenGigabitEthernet 0/5      00:01:e8:05:40:46
Te 0/2                     -                     TenGigabitEthernet 0/6      00:01:e8:05:40:46

 

Eksempel på visning av detaljer annonsert av naboer

Dell# show lldp neighbors detail
========================================================================
Local Interface Te 0/4 has 1 neighbor
Total Frames Out: 6547
Total Frames In: 4136
Total Neighbor information Age outs: 0
Total Frames Discarded: 0
Total In Error Frames: 0
Total Unrecognized TLVs: 0
Total TLVs Discarded: 0
Next packet will be sent after 7 seconds
The neighbors are given below:
-----------------------------------------------------------------------

Remote Chassis ID Subtype: Mac address (4)
Remote Chassis ID: 00:01:e8:06:95:3e
Remote Port Subtype: Interface name (5)
Remote Port ID: TeGigabitEthernet 2/11
Local Port ID: TenGigabitEthernet 1/21
Locally assigned remote Neighbor Index: 4
Remote TTL: 120
Information valid for next 120 seconds
Time since last information change of this neighbor: 01:50:16
Remote MTU: 1554
Remote System Desc: Dell Networks Real Time Operating System Software
Dell Operating System Version: 1.0.
Dell Application Software Version: 9.4.0.0. Copyright (c) 1999-2014
Build Time: Thu Aug 9 01:05:51 PDT 1999-2014
Existing System Capabilities: Repeater Bridge Router
Enabled System Capabilities: Repeater Bridge Router
Remote Port Vlan ID: 1
Port and Protocol Vlan ID: 1, Capability: Supported, Status: Enabled

---------------------------------------------------------------------------

Prodotti interessati

PowerSwitch S3048-ON, PowerSwitch S4048-ON, PowerSwitch S4810P, PowerSwitch S4810-ON, PowerSwitch S4820T, PowerSwitch S5000, Force10 S60-44T, PowerSwitch S6000, PowerSwitch S6000 ON, PowerSwitch S4048T-ON, PowerSwitch S5048F-ON, PowerSwitch S6010-ON , PowerSwitch S6100-ON, PowerSwitch Z9100-ON ...
Proprietà dell'articolo
Numero articolo: 000120105
Tipo di articolo: How To
Ultima modifica: 31 dic 2025
Versione:  8
Trova risposta alle tue domande dagli altri utenti Dell
Support Services
Verifica che il dispositivo sia coperto dai Servizi di supporto.