메인 콘텐츠로 이동
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.

How to fix an Invalid Partition Table error on a system with a Solid-State Drive (SSD)

요약: This page gives information about how to fix an Invalid Partition Table error on a system with an SSD.

이 문서는 자동으로 번역되었을 수 있습니다. 번역 품질에 대한 의견이 있는 경우 페이지 하단의 양식을 사용해 알려 주시기 바랍니다.

문서 콘텐츠


증상

An error message "Invalid Partition Table" is received when installing Windows onto a Solid State Drive (SSD) either manually or using a custom image.

A BIOS update resolves this issue, but a working Operating System and a bootable USB Flash drive is required.

원인

Cause information is not available.

해결

An Invalid Partition Table error message is received when installing Windows manually on the SSD or with a custom install image. Update the BIOS to the latest version. If a working Operating System is not available, access to another system and a bootable USB Flash drive is required.

NOTE: For help with creating a bootable USB memory stick see the following Article:

Download the BIOS on a working computer to a bootable USB drive.

  1. On another computer, connect your bootable USB drive to the USB port

  2. Go to Dell's drivers home page and get the latest BIOS for your system type.

  3. Under the BIOS category, locate the latest version for your system and click Download File.

  4. Select the Single-File download option and click Continue.

  5. Save the file to your bootable USB drive.

  6. Disconnect the bootable USB drive from the USB port and put it in the target system.

Install the BIOS from the bootable USB drive on to your system.

  1. Connect the bootable USB drive to a USB port on your System.

  2. Start or restart your computer.

  3. Press F12 on startup to open the Boot Device menu. (You may have to tap F12 several times until you see "Preparing one-time boot menu")

  4. Use the Arrow keys to select your USB device from the device list and press Enter.

  5. If the BIOS .exe file does not automatically run, you must:

    • Type the command prompt E:\XXXXXXXX.exe. E is the name of the bootable USB drive letter and XXXXXXXX is the name of file that is saved to the bootable USB drive.
       For example, you may type: E:\M6700A08.exe.

  6. Press Enter to run the file and install the BIOS.

  7. After the update, your computer restarts, and you can then continue installing your operating system.

Back to Top


SLN133635_en_US__2HDD  Source additional information about Hard Drives and Solid State Drives on our support page.

추가 정보

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.


Out of Warranty support Out of warranty? No problem. Browse to the Dell.com/support website and enter your Dell Service Tag and view our offers.

NOTE: Offers are only available for US, Canada, UK, France, Germany, and China personal computer customers. Server and Storage not applicable.

문서 속성


영향을 받는 제품

Laptops, Precision M6700

마지막 게시 날짜

30 1월 2024

버전

7

문서 유형

Solution