메인 콘텐츠로 이동
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.
일부 문서 번호가 변경되었을 수 있습니다. 이 문서가 찾으려는 문서가 아닌 경우 모든 문서를 검색해 보십시오. 문서 검색

Touch Screen May Have Intermittent Issues or Stop Working Due to Power Management Settings

요약: Steps for configuring power management settings to get touch screen to work correctly.

이 문서는 자동으로 번역되었을 수 있습니다. 번역 품질에 대한 의견이 있는 경우 페이지 하단의 양식을 사용해 알려 주시기 바랍니다.

문서 콘텐츠


증상

The following article gives information about touch screens not working after power management settings are changed.


Touch Screen Inoperative After the LCD Display is Disabled by Power Management

You may encounter a situation where the touch input of the touchscreen display will not work after the power management disables the touchscreen.

EXAMPLE: If you set the screen to DIM after 2 minutes and TURN-OFF after 3 minutes. Moving the mouse, hitting any key turns the display back on, but the touch input no longer works.

Note: If your system does not have a Human Interface Device (HID) listing in Device Manager, then this article does not apply to your system.

원인

Cause information is not available.

해결

Adjust HID USB Power Management Setting in Device Manager

The solution is to adjust the power setting in device manager under Human interface Devices (HID) devices (Figure 1).
SLN290492_en_US__21396294896539.USBI
Figure 1

To resolve this issue, complete the following steps:

  1. Open Device Manager.
    Windows 7:

    1. Click Start
    2. Type Device Manager
    3. Click Device Manager on the menu

    Windows 8/8.1
    1. At theStart screen
    2. Type Device
    3. Click the Device Manager icon

     

  2. Click the arrow next to Human interface Devices. You should see 2 items that are listed as a USB device.

    1. Right-click each USB Device and click properties on the drop-down menu
    2. In the USB Device properties window, click the power management tab
    3. Under the power management tab, there is a checkbox next to "Allow the computer to turn this device off to save power"
    4. Uncheck the check box then click OK. Repeat these steps for the second USB Device.
    5. Reboot the system.

     

The touch screen should retain touch functionality after it is turned off. You can use either the mouse, keyboard, or touch screen to turn the LCD back on (Figure 2).
SLN290492_en_US__31396294852665.USB
Figure 2

If you have further questions about this solution, please contact Dell Technical Support.

추가 정보

문서 속성


영향을 받는 제품

Latitude E7240 Ultrabook, Latitude E7440

마지막 게시 날짜

05 1월 2024

버전

4

문서 유형

Solution