SONiC do Dell Networking: Protocolo de resolução de endereço IPv4
요약: Este artigo explica sobre o protocolo de resolução de endereçoS IPv4 no Dell Networking SONiC. Este artigo usa um comutador que executa o Dell SONiC 4.1.
이 문서는 다음에 적용됩니다.
이 문서는 다음에 적용되지 않습니다.
이 문서는 특정 제품과 관련이 없습니다.
모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
지침
|
Pré-requisitos
Estamos usando a nomenclatura de interface padrão para demonstrar os conceitos. Consulte o artigo da Dell 202172 Dell Networking Série S: Configuração básica de interface - SONiC 4.0 para obter mais informações sobre nomenclatura de interface |
Índice
Introdução
Exibir entradas do protocolo de resolução de endereço IPv4.
Limpar entradas IPv4
Introdução
O Protocolo de resolução de endereços (ARP) permite que os pacotes IPv4 sejam enviados entre redes, traduzindo endereços IP de rede para endereços de hardware MAC e endereços MAC para endereços IP. O endereço MAC e o endereço IP correspondente dos dispositivos de destino são mantidos na tabela ARP. Usando o endereço IP, a tabela ARP permite que o comutador recupere rapidamente o endereço MAC associado, encapsular o pacote IP em um quadro L2 e transmiti-lo pela rede para um destino.Exibir entradas ARP IPv4
Para exibir entradas da tabela ARP, use o comando show ip arp . Para filtrar a saída, especifique uma interface, port channel ou VLAN, um endereço IP no formato x.x.x.x, um endereço MAC ou uma combinação de mais de um valor para corresponder. Você também pode exibir informações resumidas e as entradas ARP IPv4 em um VRF especificado.Sintaxe do comando
admin@DELLSONiC:~$ sonic-cli DELLSONiC# configure DELLSONiC(config)#show ip arp |
DELLSONiC# show ip arp Type: R - Remote Neighbor entries (EVPN or MCLAG Separate IP) ------------------------------------------------------------------------------------- Address Hardware address Interface Egress Interface Type Action ------------------------------------------------------------------------------------- 192.1xx.1.4 00:01:02:03:44:55 Eth1/3 - Dynamic Fwd 192.1xx.2.4 00:01:02:03:ab:cd PortChannel200 - Dynamic Fwd 192.1xx.3.6 00:01:02:03:04:05 Vlan100 Eth1/2 Dynamic Fwd 10.11.48.2xx 00:01:e8:8b:44:71 Management0 - Dynamic Fwd 0.0.0.0 00:00:00:00:00:00 lo - Dynamic Fwd |
Nota: A última entrada ARP para o endereço IP de loopback 0.0.0.0 pode ser inserida a partir do sonic NEIGH_TABLE de APPL_DB. Para excluir a entrada, você deve excluí-la manualmente do REDIS_DB usando o redis-cli ou qualquer outro aplicativo que permita editar o REDIS_DB.
DELLSONiC# show ip arp interface Vlan 20 Type: R - Remote Neighbor entries (EVPN or MCLAG Separate IP) ----------------------------------------------------------------------- Address Hardware address Interface Egress Interface Type Action ----------------------------------------------------------------------- 20.0.0.2 90:b1:1c:f4:9d:ba Vlan20 Eth1/1 Dynamic Fwd 20.0.0.5 00:11:22:33:44:55 Vlan20 Eth1/1 Dynamic Fwd |
DELLSONiC# show ip arp 20.0.0.2 Type: R - Remote Neighbor entries (EVPN or MCLAG Separate IP) ----------------------------------------------------------------------- Address Hardware address Interface Egress Interface Type Action ----------------------------------------------------------------------- 20.0.0.2 90:b1:1c:f4:9d:ba Vlan20 Eth1/1 Dynamic Fwd |
DELLSONiC# show ip arp mac-address 90:b1:1c:f4:9d:ba Type: R - Remote Neighbor entries (EVPN or MCLAG Separate IP) ----------------------------------------------------------------------- Address Hardware address Interface Egress Interface Type Action ----------------------------------------------------------------------- 20.0.0.2 90:b1:1c:f4:9d:ba Vlan20 Eth1/1 Dynamic Fwd |
DELLSONiC# show ip arp summary Total Entries ------------- 2 |
DELLSONiC# show ip arp vrf Vrf_1 Type: R - Remote Neighbor entries (EVPN or MCLAG Separate IP) ----------------------------------------------------------------------- Address Hardware address Interface Egress Interface Type Action ----------------------------------------------------------------------- 20.0.0.2 90:b1:1c:f4:9d:ba Vlan20 Eth1/1 Dynamic Fwd 20.0.0.5 00:11:22:33:44:55 Vlan20 Eth1/1 Dynamic Fwd |
Limpar entradas IPv4
Para excluir entradas IPv4 aprendidas dinamicamente da tabela ARP, use o comando clear ip arp. Para especificar as entradas a serem excluídas, digite uma interface, port channel ou VLAN, um endereço IPv4 ou uma combinação para corresponder. Digite force para excluir entradas ARP configuradas estaticamente. Use o comando show ip arp para verificar se as entradas IPv4 foram excluídas. DELLSONiC# clear ip arp < [interface {Eth slot/port[/breakout-port] | PortChannel number | Vlan vlanid | Management port-number}] [ip-address] [vrf vrf-name]> |
DELLSONiC# show ip arp Type: R - Remote Neighbor entries (EVPN or MCLAG Separate IP) ------------------------------------------------------------------------------------- Address Hardware address Interface Egress Interface Type Action ------------------------------------------------------------------------------------- 192.168.2.4 00:01:02:03:ab:cd PortChannel200 - Dynamic Fwd 192.168.3.6 00:01:02:03:04:05 Vlan100 Eth1/2 Dynamic Fwd 10.11.48.254 00:01:e8:8b:44:71 Management0 - Dynamic Fwd sonic# clear ip arp interface Vlan 100 sonic# show ip arp Type: R - Remote Neighbor entries (EVPN or MCLAG Separate IP) ------------------------------------------------------------------------------------- Address Hardware address Interface Egress Interface Type Action ------------------------------------------------------------------------------------- 192.168.2.4 00:01:02:03:ab:cd PortChannel200 - Dynamic Fwd 10.11.48.254 00:01:e8:8b:44:71 Management0 - Dynamic Fwd |
해당 제품
PowerSwitch E3200-ON Series, Dell EMC Networking N3200-ON, PowerSwitch S5212F-ON, PowerSwitch S5224F-ON, PowerSwitch S5232F-ON, PowerSwitch S5248F-ON, PowerSwitch S5296F-ON, PowerSwitch Z9264F-ON, PowerSwitch Z9332F-ON, PowerSwitch Z9432F-ON문서 속성
문서 번호: 000218168
문서 유형: How To
마지막 수정 시간: 16 10월 2023
버전: 3
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.