OptiPlex 3050: Teardown Removal Guide Index

Summary: This is an index page to the part removal guides available for the various models of the OptiPlex 3050 series.

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.
Consultați alte resurse

Symptoms

These guides take you through each step of the safe removal of the Customer Replaceable Unit (CRU) parts of the various OptiPlex 3050 System Type systems. (CRUs are the parts of the system that should not require a Customer Support engineer to remove or replace.)

The guides also include screenshots to reference what is involved.

Table of Contents:

  1. Removal Guide Introduction
  2. The Mini Tower (MT) Chassis
  3. The Small Form Factor (SFF) Chassis
  4. The Micro Form Factor (MFF) Chassis

 

Cause

Not required

Resolution

Removal Guide Introduction

If these guides do not cover what you are looking to do, reference your System Manual.
Back to Top

The Mini Tower (MT) Chassis

Back to Top

The Small Form Factor (SFF) Chassis

Back to Top

The Micro Form Factor (MFF) Chassis

Back to Top


If you require further assistance, contact Dell Technical Support.

Produse afectate

OptiPlex 3050 Tower, OptiPlex 3050 Micro, OptiPlex 3050 Small Form Factor
Proprietăți articol
Article Number: 000123868
Article Type: Solution
Ultima modificare: 26 Sep 2023
Version:  10
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.