OptiPlex XE3 Teardown Removal Guides for Customer Replaceable Units (CRUs)

Summary: An OptiPlex XE3 teardown removal can be performed for customer replaceable units by following these instructions.

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.
Consultați alte resurse

Symptoms

These guides take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of the various OptiPlex XE3 form factors. (CRUs are the parts of the system that should not need an engineer to remove or replace.) The guides also include figures to reference what is involved.

Table of Contents:

  1. Removal Guide Introduction
  2. The Mini Tower (MT) Chassis
  3. The Small Form Factor (SFF) Chassis

Cause

Removal Guide Introduction

 

If these guides do not cover what you are looking to do, then reference your System Manual.


Back to Top

The Mini Tower (MT) Chassis

 


Back to Top

The Small Form Factor (SFF) Chassis

 


Back to Top

Resolution

 

  If you require further assistance, contact Technical Support.  
  Contact Us  

Produse afectate

Optiplex XE3
Proprietăți articol
Article Number: 000146733
Article Type: Solution
Ultima modificare: 27 May 2025
Version:  7
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.