Avamar: Tarkistus epäonnistui ja näytti tulokselta MSG_ERR_BADTIMESYNC.

Summary: Tarkistuspisteet epäonnistuvat tuloksella "MSG_ERR_BADTIMESYNC"

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.

Symptoms

Tarkistuspiste epäonnistui tuloksella "MSG_ERR_BADTIMESYNC"

"avmaint cpstatus" -komento näyttää seuraavan virheen:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<cpstatus
  generation-time="1663935384"
  tag="cp.20220923121551"
  status="error"
  stripes-completed="0"
  stripes-total="0"
  start-time="1663935351"
  end-time="1663935351"
  result="MSG_ERR_BADTIMESYNC"
  refcount="1"/>
 

"mapall --parallel 'date'" -komento osoittaa, että solmu ei ole synkronoitu:
(Matall-komennon suorittaminen edellyttää, että avaimet on ladattu Avamaria kohti: Avamar Serveriin kirjautuminen ja erilaisten avainten lataaminen)

admin@utility:~/>: mapall --parallel 'date'
Using /usr/local/avamar/var/probe.xml
(0.0) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.2 'date'
(0.1) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.3 'date'
(0.2) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.4 'date'
(0.3) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.5 'date'
(0.4) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.6 'date'
(0.7) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.9 'date'
(0.6) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.8 'date'
(0.5) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.7 'date'
Fri Sep 23 13:05:21 UTC 2022
Fri Sep 23 13:05:21 UTC 2022
Fri Sep 23 13:07:17 UTC 2022 <---- out of sync node
Fri Sep 23 13:05:20 UTC 2022
Fri Sep 23 13:05:22 UTC 2022
Fri Sep 23 13:05:20 UTC 2022
Fri Sep 23 13:05:22 UTC 2022
Fri Sep 23 13:05:21 UTC 2022
 

Verkkoaikaprotokollan (NTP) tarkistaminen "ntpq -pn" -komento näyttää viestin "Yhteys estetty" epäillyssä solmussa:
(Tulosta muokattu näyttämään vain solmu, jota ongelma koskee)

admin@utility:~/>: mapall --noerror '/usr/sbin/ntpq -pn'
Using /usr/local/avamar/var/probe.xml
...
(0.3) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.5 '/usr/sbin/ntpq -pn'
/usr/sbin/ntpq: read: Connection refused
...
 

Kun ongelma koskee solmun tilaa suoraan pääkäyttäjänä, NTPD (Network Time Protocol Daemon) -näytössä näkyy teksti Active: activate (auto-restart) (Result: resources)":

root@node03:~/>: systemctl status ntpd
● ntpd.service - NTP Server Daemon
   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)
  Drop-In: /run/systemd/generator/ntpd.service.d
           └─50-insserv.conf-$time.conf
   Active: activating (auto-restart) (Result: resources) since Fri 2022-09-23 13:22:35 UTC; 1min 58s ago
 

Tilan pitäisi olla Aktiivinen: aktiivinen (käynnissä):

● ntpd.service - NTP Server Daemon
   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)
  Drop-In: /run/systemd/generator/ntpd.service.d
           └─50-insserv.conf-$time.conf
   Active: active (running) since Fri 2022-09-23 14:04:37 UTC; 26s ago
 

NTPD:n käynnistysyritys epäonnistuu:

root@node03:~/#: systemctl start ntpd.service
Job for ntpd.service failed because a configured resource limit was exceeded. See "systemctl status ntpd.service" and "journalctl -xe" for details.
 

"journalctl -xe" komento raportoi "Laitteessa ei ole enää tilaa" -viestejä.

"df" -komento osoittaa, että /var on 100 %:

df -kh
Filesystem      Size  Used Avail Use% Mounted on
devtmpfs         16G  8.0K   16G   1% /dev
tmpfs            16G     0   16G   0% /dev/shm
tmpfs            16G   50M   16G   1% /run
tmpfs            16G     0   16G   0% /sys/fs/cgroup
/dev/sda5       9.8G  2.4G  7.0G  26% /
/dev/sdg1       183G  8.3G  165G   5% /ssd01
/dev/sda1       979M   50M  878M   6% /boot
/dev/sdd1       1.9T  236G  1.6T  13% /data04
/dev/sdc1       1.9T  240G  1.6T  13% /data03
/dev/sde1       1.9T  236G  1.6T  13% /data05
/dev/sdf1       1.9T  238G  1.6T  13% /data06
/dev/sdb1       1.9T  238G  1.6T  13% /data02
/dev/sda7       2.0G  2.0G     0 100% /var       <------- 100% Use
/dev/sda3       1.8T  267G  1.6T  15% /data01

Cause

NTPD perustuu /var/lib/ntp/drift/ntp.drift joka sisältää viimeisimmän arvion kellotaajuusvirheestä.

Jos /var on 100% täynnä, NTPD ei voi päivittää tai luoda ntp.drift tiedosto ja NTP eivät toimi oikein.

Resolution

1. Tutki ja ratkaise 100 %:n käyttö solmussa, jota ongelma koskee /vaR.

2. Korjauksen jälkeen:

a. Käynnistä NTPD uudelleen: 

root@node03:~/#: systemctl restart ntpd
Huomautus: Onnistunut uudelleenkäynnistys ei tuota tulosta.
 
 

B. Tarkista ntpd:n tila:

root@node03:~/#: systemctl status ntpd
 

Seuraavanlaisia tuloksia pitäisi nähdä:

● ntpd.service - NTP Server Daemon
   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)
   Active: active (running) since Tue 2022-09-27 21:21:42 UTC; 37s ago
     Docs: man:ntpd(1)
  Process: 29442 ExecStart=/usr/sbin/start-ntpd start (code=exited, status=0/SUCCESS)
 Main PID: 29463 (ntpd)
    Tasks: 2
   CGroup: /system.slice/ntpd.service
           ├─29463 /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -g -u ntp:ntp -c /etc/ntp.conf
           └─29464 ntpd: asynchronous dns resolver

Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 3 bond0 10.n.n.52:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 4 bond1 192.168.255.22:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 5 lo [::1]:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 6 bond0 [fe80::260:16ff:feaa:2a10%11]:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 7 bond1 [fe80::260:16ff:fea9:b182%12]:123
Sep 27 21:21:42 node03 ntpd[29463]: Listening on routing socket on fd #24 for interface updates
Sep 27 21:21:42 node03 start-ntpd[29442]: Starting network time protocol daemon (NTPD)
Sep 27 21:21:42 node03 systemd[1]: Started NTP Server Daemon.
 

c. Tarkista NTP ntpq:

root@node03:~/#: /usr/sbin/ntpq -pn
 

Seuraavanlaisia tuloksia pitäisi nähdä:


     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
*10.241.216.209  10.233.131.242   2 u  966 1024  377    0.558    1.559   0.600
+192.168.255.21  10.241.216.209   3 u  401 1024  377    0.152    0.521   0.420
 

3. Varmista ratkaisu suorittamalla manuaalinen tarkistuspiste Avamar Utility Node -solmussa.

Produse afectate

Avamar, Avamar Data Store, Avamar Data Store Gen3, Avamar Data Store Gen4, Avamar Data Store Gen4S, Avamar Data Store Gen4T, Avamar Data Store Gen5A, Avamar Server, Avamar Virtual Edition
Proprietăți articol
Article Number: 000203791
Article Type: Solution
Ultima modificare: 25 Jun 2026
Version:  6
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.