Connectrix Brocade:DCX8510-8B 重新启动并显示错误处理器重新启动 - 重置
Summary: DCX8510-8B 重新启动并显示错误“处理器重新启动 - 重置”
Acest articol se aplică pentru
Acest articol nu se aplică pentru
Acest articol nu este legat de un produs specific.
Acest articol nu acoperă toate versiunile de produs existente.
Symptoms
交换机意外重新启动。开机自检,启用 CP 并同步 HA。
发现插槽 7 中的 CP 因 emtraceshow2 输出而出现故障。
这里列出了插槽 7 的单个 FLT(故障)。没有其他迹象表明有任何其他问题。
Fabric OS: v8.2.3c /fabos/cliexec/hadump: Local CP (Slot 6, CP0): Active, Cold Recovered Remote CP (Slot 7, CP1): Standby, Healthy HA enabled, Heartbeat Up, HA State synchronized errdump : [HAM-1004], SLOT 7 | CHASSIS, INFO, Processor rebooted - Reset., reboot.c [PLAT-5067], SLOT 7 | CHASSIS, INFO, Disabling PCI timeout detect. Rev 4, modular_proc.
发现插槽 7 中的 CP 因 emtraceshow2 输出而出现故障。
提醒:有一个名为 EMTRACESHOW2 的根级命令。它是 supportsave 的一部分,显示重新启动后启动的组件。
这里列出了插槽 7 的单个 FLT(故障)。没有其他迹象表明有任何其他问题。
/fabos/cliexec/emtraceshow2: Object Before SCN Send After privSt m fo date/time Slot 7 IN(20000) FLT(10014) ---------- IN(20000) 000000 1 0 Jan 29 14:20:51 CP BLADE Slot: 7 Header Version: 2 Power Consume Factor: -40W Factory Part Num: 60-1000376-10 Factory Serial Num: xxxxx Manufacture: Day: 16 Month: 6 Year: 2012 Update: Day: 1 Month: 2 Year: 2023 Time Alive: 3742 days Time Awake: 3 days
Cause
硬件故障
Resolution
修复:
1) 重新拔插位于插槽 7 的备用 CP。然后,它将完成开机自检并从错误状态恢复。
2) 如果重新拔插 CP 刀片不能解决问题,请更换 CP 刀片。
1) 重新拔插位于插槽 7 的备用 CP。然后,它将完成开机自检并从错误状态恢复。
2) 如果重新拔插 CP 刀片不能解决问题,请更换 CP 刀片。
Produse afectate
Connectrix ED-DCX8510-8BProduse
Connectrix B-SeriesProprietăți articol
Article Number: 000210195
Article Type: Solution
Ultima modificare: 16 May 2026
Version: 6
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.