NetWorker: Data Domain Device Mount Fails with Error 5520
Summary: Mounting or creating a Data Domain (DD) device in NetWorker may fail with error code 5520 if Retention Lock (RL) is not enabled and the system attempts to modify a retention-locked file. This issue is linked to an unexpected value in the global encryption setting on the DD system. ...
Acest articol se aplică pentru
Acest articol nu se aplică pentru
Acest articol nu este legat de un produs specific.
Acest articol nu acoperă toate versiunile de produs existente.
Symptoms
Device mount or creation fails with the following error:
-
Err 5520: Cannot delete or modify a retention-locked file.
Cause
The failure occurs because the global encryption strength setting on the Data Domain system is incorrectly capitalized. NetWorker expects specific lowercase values, and mismatches can trigger retention lock-related errors during device operations.
Example of incorrect configuration:
-
# ddboost option show Option Value ------------------------------ ------- global-encryption-strength Medium
Resolution
Update the encryption setting to use the correct lowercase value. Acceptable values are:
nonemediumhigh
To correct the setting:
Run the following command on the DD system:
-
ddboost option set global-authentication-mode none global-encryption-strength medium
This change ensures compatibility with NetWorker operations and resolves the mount failure.
Produse afectate
NetWorker Family, NetWorkerProduse
Data DomainProprietăți articol
Article Number: 000381991
Article Type: Solution
Ultima modificare: 22 Oct 2025
Version: 1
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.